Wolfcraft guide rail for hand circle saw FKS 145

Mount the guide rail for circular saws of Wolfcraft on your circular saw. Your tool is then ready to cut wood, plastic, metal and many more materials!

This perfect combination of machine and saw guide rail ensures that you can make long, straight saw cuts with the correct precision.

• Color: Gray
• Material: Aluminum
• Dimensions: 79.6 x 24 x 5.5 cm (L x B x D)
• Total length of guide rail: 145 cm
• For cuts up to 110 cm
• Divisible for saw cuts up to 55 cm
• Spacial storage

LOOK AFTER! Read all safety information and instructions that have been supplied with the FKS 145 guide rail and the electrical tools used. Non -compliance with safety information and instructions can lead to electric shock, fire and/or serious injury. • Keep the manual in a safe place for future use. General safety information • Danger: Remove the plug from the electrical socket or remove the battery from the electrical tool before adjusting the tool or changing accessories. Accidents can happen if the electric tools start unintentionally. • Keep your work area clean and well lit. Sloppy or dark work areas can lead to accidents. • Before you start working, check that the devices and tools work well. Never work with damaged or blunt tools. • Remove the set -up tools or moers keys before switching on the electrical tools. A tool or moers key that is still attached to a rotating part of the device can cause injuries. • Be careful. Never use electric tools if you are under the influence of drugs or alcohol. One moment of inattention can result in serious injuries. • Wear suitable personal protective equipment: hearing protection, safety glasses and dust mask if the work generates dust. • Wear suitable clothing. Never wear loose clothing or jewelry. Keep long hair, clothing and gloves away from rotating parts. • Keep children and other people from your working area while using electrical tools. If you become distracted, you can lose control of the tools. • Keep unused electrical tools away from children. Let people who are unknown with the tools and people who have not read the manual do not use the tools. Electric tools are dangerous when used by inexperienced people. • The machine that is used must meet DIN EN 60745-1. Equipment built after 1995 must wear a CE marking. • Only use the tools on wood and easily workable plastic. • The machine that is used must meet DIN EN 62841-5. • Use tools only for their intended purpose. • Make sure that the guide rail is used on a stable, level surface surface. • The guide rail may not be adjusted to use other machines on the rail. • Only use the assembly carrier that is included, no older versions or own designs. • Regularly check that all screws on the assembly carrier are properly tightened. • Only remove the manual circular saw in the start/stop position of the assembly carrier (closed with the safety cap) and only after the saw blade has come to a halt. Safety information for manual circular saws • In addition to these machine-specific safety instructions, the safety instructions for the manual circular saw that you use must also be followed. • Danger: keep your hands out of the saw area and away from the saw blade. • Only use manual circular saws with a saw blade diameter from at least 130 mm to a maximum of 200 mm and a sawd of 40 to 70 mm. • Support long works on the jug of removal, so that the piece is in a horizontal position; For example, use a Wolfcraft rolling (art. No. 6119973). • Avoid overloading the manual cikel saw. • Do not use sanding discs. • Connect the vacuum system to the circular saw (if available). • Only use recommended Marken saw blades and choose them based on the material that will be sawn. • Always be aware that the workpiece can hit back and the operator can hit. • A return is the result of incorrect use of the saw and/or incorrect application. It can be prevented by suitable take precautions as described below. • Hold the saw firmly with both hands and keep your arms in the right position, so that you can absorb the declaration force. Always stand on the side of the saw blade, never put your body in line with the saw blade. In the case of a fall, a circular saw can bounce backwards, the operator could keep such a situation under control by taking suitable precautions. • If the saw blade blocks or if you interrupt your work, the saw must always be switched off and held in the material until the leaf has completely stopped turning. Never try to remove the saw from the workpiece or pull it backwards while the leaf is still running, since this can result in a recoil. Determine the reason for the block quay and eliminate the cause. • If you want to start a saw that is still in the workpiece, center the leaf in the saw opening and check that the saw teeth are blocked in the workpiece. If the saw blade blocks, it can free itself from the workpiece or cause a recoil when the saw is restarted. • Do not use blunt or damaged saw blades. Saw blades with blunt or unsuitable teeth increase the friction in the narrow saw opening, allowing the leaf to block and beat back. • Do not use the guide rail for Insedes. The inciting sawbad can block through hidden objects, which can cause recoil. • Use the guide rail only for manual circular saws with saw blade that is set vertically (90 degrees). • Never clamp the manual circular saw on the mounting carrier. • Make sure that the saw blade always runs parallel to the assembly carrier or the guide rail.