Soudal sws vario extra | fólie regulující vlhkost | 70mm x 30m | bílá - 157711

SWS Vario Extra is a fully adhesive, moisture-regulating foil with a 2 or 3-part release liner and 1 opposing self-adhesive strip, also with release liner, for the airtight and watertight sealing of connections around windows, doors and panels. SWS Vario Extra can be applied on both the inside and outside. Due to its special properties, the Sd-value adapts to the seasonal differences in temperature and humidity that occur in the connection joints. This allows for weather-independent moisture transport from inside to outside or from outside to inside. This keeps the connection joint dry all year round and prevents condensation damage.Special featuresAirtight and watertightVariable Sd-value and consequently a high drying effect of the jointPressure-sensitive, self-adhesive strip on one side and fully adhesive on the other sideOnly 1 foil for both indoor and outdoor applicationsLimited UV-resistant, approx. 6 monthsPlasterable and paintableFlexible and tear-resistantApplicationFor the airtight and watertight finishing of construction connections and window connections such as the inside of the inner leaf (reveal), the outside of the inner leaf (before applying facade insulation), under the windowsill or threshold and the inside and outside of solid walls.Instructions for useDepending on the situation, the installation of SWS Vario Extra can be carried out before or after the installation of the building element (e.g. window frame). There are 2 methods for applying SWS Vario Extra. You can work with a single strip or with 4 separate strips. In both cases, extra material must be provided for the corners (approx. 5 to 10 cm per corner). After unrolling, adhere the foil, with the exposed adhesive strip (on the text side), to the side of the building element OR remove the release liner from the adhesive strip on the non-text side and adhere the foil to the front of the building element. Always ensure that the text is legible and facing the visible side. Remove the remaining release liner evenly. Adhere the foil, not too tightly, to the rough construction to accommodate any movements between the different building elements. The adhesive layer of the foil is pressure-sensitive; the firmer you press, the better the adhesion. If possible, use a pressure roller. Adhesive residues can be removed with soap and water.