Fahrer mud flap bib mud flap latz e-bike latz

Reliable mud flap for e-bikes. Our E-BIKE LATZ mud flap prevents splashing rainwater from making your shoes, pant legs, or bike trailer wet and dirty while riding. Mudguards often don't drain away splashwater sufficiently, so the mud flap serves as an extension of the mudguard. This makes the ride to the office or your bike ride even more comfortable. Besides protecting your clothes while riding on wet roads, the E-BIKE LATZ also prevents flying stones from damaging the frame's paintwork. The mud flap is made from a truck tarpaulin and is attached to the lower section of the mudguard as an extension. Thanks to the reinforced material, the mud flap retains its shape even at higher speeds and in headwinds, making it ideal for use on e-bikes. The E-BIKE LATZ can be optionally mounted on mudguards with a width of 60-65 mm on the front or rear wheel. Note: Suitable for a mudguard width of 60-65 mm. Features: Bicycle mudguard extension made of truck tarpaulin Dimensionally stable, even at higher speeds Colour: black. Material: Truck tarpaulin. Reinforced and optimised for use at higher speeds Length: approx. 230 mm | Top width: 83 mm | Bottom width: 120 mm. Attachment to the mudguard stays: With cable ties (included) Weight: approx. 36 grams. Designed in Berlin Made in cooperation with workshops for people with disabilities. Scope of delivery: LATZ mud flap and 3 x cable ties. Assembly: Thread a cable tie from behind through the two holes on the left and right sides of the flap, so that the pointed ends are at the top and the lock is at the bottom. Now turn the mudguard over and position it in the middle of the lower end of the mudguard. Place the cable ties on the left and right sides of the mudguard stays and tighten them. Cut off the protruding ends of the cable ties with side cutters.