Liqui moly additive for diesel flushing diesel flushing 500ml lm

For all diesel engines with and without particulate filter (DPF). For preventive and problem-solving use when the engine is idling unevenly and when nailing at part load. Removes deposits on injection nozzles and in the combustion chamber. Increases the cetane number. Eliminates engine running problems such as stuttering at idle speed and ensures smooth and quiet engine running. Protects the entire fuel system against corrosion. Optimizes the AU values. Can capacity is sufficient for a maximum of 75 liters of fuel. Fully compatible with all conventional diesel and biodiesel fuels. Suitable for HVO and XTL diesel. Application Preventive use: Inspection interval addition to diesel. Application for problem-related use: Disconnect the fuel suction line and insert it into the diesel flushing system. Shut off the fuel return line or plug it into the diesel flushing system. Start the engine and run the engine at various speeds with unmixed diesel flush. After the cleaning process, install the vehicle's own system; repeat the cleaning process if necessary in case of extreme contamination. As an alternative to problematic use, you can also use cleaner with our JetClean device. To do this, pour 2 - 3 liters of diesel flushing agent into the reservoir of the JetClean. Further use is described in the operating instructions of the JetClean device. Fuel system range Fuel efficiency (A-G) diesel Category car, small appliances, marine, oldtimer, freight vehicles Contents 0.5 l Type of packaging can Type/type Article Version additions