The high -quality, water -saving, thermostatic shower mixer London van Schütte is a perfect choice for every bathroom.
The bathroom mixture crane is distinguished by a replaceable thermostat element and temperature distribution with child protection at 38 ° C. The unique Eco-stop function contributes to up to 50% less water consumption. Thanks to the chromed surface, this mixer has a reflective shine. The construction of solid brass makes the bathroom tap very durable.
The mixer is easy to install and clean.
- Color: Chrome
- Material: brass
- Finishing: chromed
- Dimensions: 26.8 x 7.2 x 5.5 cm (L x B x H)
- 120 mm measurement distance for the connection
- Replaceable thermostat element
- Temperature distribution with child protection at 38 ° C
- Eco -stop function - up to 50% less water consumption
- ½ "(Ø about 1.9 cm) Ceramic interior and shower hose connection
Safety information · Have the installation only carried out by experts. · Beware: water damage! Close the water supply before installation. · Make sure that all gaskets have the right size. · These faucets are not suitable for use at low pressure and for small electric boilers. · We recommend installing a filter in the device, or at least to use corner valves with filter, to prevent strange materials that can damage the upper parts of the valves. · This tap is only intended for household use! Only suitable for use in rooms with a temperature of more than 0 ° C. If there is a chance of frost, close the water supply and let the tap drain. · If the tap has not been used for a long time, we recommend that the water run for a while before you use it as drinking water. · Be careful when you use the hot water. Danger of burns! · Incorrectly installed connections can cause water damage! · Despite careful production, the product can have sharp edges. Be careful! Drain Your water tap is supplied in a massive package to protect it against transport damage. The package consists of recyclable materials. Drain them in an environmentally conscious way. Do not throw the product at the end of its lifespan in the residual waste. Ask the municipal administration about the possibilities for environmentally friendly drainage. Technical data · flow pressure: recommended as 1.5 bar. Install a pressure regulator at more than 6 bar. · Water temperature: max. 80 ℃. Installation instructions · Loosen the nozzle after installing the tap. Then let the pipe and tap (hot/cold water supply) go well for a while, to rinse infections (chips and hempresidu). Then turn the nozzle back on the tap. · After the first use, thoroughly check all connections. · We offer no guarantee in the event of incorrect installation and the resulting damage! Sanitary cranes care instructions require special care. Therefore, follow the following instructions: · Chrome surfaces are sensitive to lime -losing agents, acid -containing cleaning products and all types of abrasives. · Never clean colored surfaces with abrasive, corroding or alcoholic agents. · Only clean your faucets with clear water and a soft cloth or sea cloth. Do not forget to regularly screw the nozzle loose to remove any limescale and strange materials. In the event of severe infection, it is recommended to replace the nozzle. Maintenance · A cartouche is a replaceable part and may have to be replaced every 1-2 years if the water contains a lot of lime or dirt. On our website you will find illustrated instructions for replacing the cartouche, via this link: web.eisl.at/qrcode/austausch_kartusche-vventileil_eisl.pdf · Check all connections regularly for leaks and visible damage. · In case of leaks or visible damage to the tap or connection hoses, they must be checked directly by a professional and if necessary replaced. Disassembly · Close the water supply before you dismantle the product. · Note the outflow of residual water. · Disassemble the product according to the assembly instructions in reverse order. 1. The illustrations should be considered figurative demonstrations, the actual product may differ from the illustrations. Subject to technical adjustments. Franz Joseph Schütte GmbH guarantee card offers a factory warranty for the product you have purchased in accordance with the warranty conditions stated below. Your legal guarantee based on the purchase contract with the seller and your legal rights are not influenced by this guarantee. Guarantee conditions: 1. Size of the warranty. Franz Joseph Schütte GmbH offers Warranty on correct material quality and material processing in accordance with the intended purpose and professional assembly, tightness and function of the one -hand mixed technology. The warranty is only valid in the country where the product was purchased. The warranty contains a 1-year warranty on the durability of non-high-gloss chromed surfaces, such as bronze or colored surfaces. The following is not covered by the warranty: · Cartouche. · Damage due to incorrect assembly, incorrect application and incorrect use - damage caused by external influences, such as fire, water and chemical influences. · Mechanical damage caused by accidents, falls or other battle effects. · Namen or deliberate destruction. · Normal wear or defects caused by poor maintenance · Damage due to repairs carried out by non -qualified persons. · Incorrect treatment, insufficient maintenance and the use of unsuitable cleaning agents. · Chemical or mechanical influences during transport, storage, connection, repairs and use of the product. 2. Warranty experience. The warranty refers to, depending on our choice, free repairs or free delivery of extra parts or a product of the same quality when returning the defective part or product. If the model in question is no longer produced, we retain the right to choose a replacement product from our range that is most similar to the returned model. Replacement products and parts become our property. When the product is returned, the purchaser bears the costs and risks of transport, if it is not a guarantee case according to the legal regulations. The reimbursement of costs for dismantling and assembly, inspection and claims with regard to lost profit and damage are excluded from the warranty, as well as further claims with regard to damage and losses of any kind that have been caused by the product or use it. 3. Submission of warranty claim. The warranty claim must be submitted to Franz Joseph Schütte GmbH, Hullerweg 1, 49134 Wallenhorst within the warranty period, by providing the original proof of purchase. 4. Warranty period. The warranty period is stated on the packaging label. In the event that no specific warranty is stated for a specific product, the warranty period is always 2 years from the purchase date, whereby the date on the proof of purchase is binding. Exception: for all non-high-gloss chrome surfaces, such as bronze or colored surfaces, the warranty period is 1 year. The date on the proof of purchase is also binding for this. The warranty period for the product is not extended or renewed via warranty services. Guarantee services do not limit the warranty period unless a case where legal facilities and legal requirements for a disability are present. 5. The German law applies to this guarantee, excluding the United Nations Convention on International Purchase Agreements on Movable Affairs (CISG). 6. Screamability clause. If one of the provisions in the guidelines is or has been fully or partially ineffective, or if the parties unintentionally do not create a guideline with regard to a situation of this contract, the validity of the other provisions in this contract remains unchanged. Instead of the ineffective or desperate provision, or instead of the contract hietate, an effective or applicable provision is added that comes closest to the intention and purpose of the ineffective or desperate determination. In the event of a gap, the provision that is corresponding to what would have been agreed must be agreed, correspondingly the intention and purpose of this contract, if the parties had considered this situation from the start. This also applies if the ineffectiveness A provision is based on a degree of performance or time that is standardized in this contract. In such cases, the agreed extent is replaced with a legally permitted degree of performance or time that comes as close as possible to the agreed extent.
