Cycplus Cycle Stallhead Cup press 1 and 1.1 8 CPL
Cycplus Cycle Stallhead Cup press 1 and 1.1 8 CPL Raigned agus seoltar é chomh luath agus a bhíonn sé ar ais i stoc.
- Suitable for 1 "and 1 1/8" ball head
- Max. Baller head length: 200 mm
- Easier and safer with lubricant
Am seachadta: Order on workdays before 5 p.m., and we are still sending the article today.
Am seachadta: Order on workdays before 5 p.m., and we are still sending the article today.
Seoltar an cód rian trí ríomhphost ionas gur féidir leat loingsiú seo a sheoladh Níl ort ach leanúint.
Níorbh fhéidir infhaighteacht bailithe a luchtú
Cycplus Cycle Stallhead Cup press 1 and 1.1 8 CPL
Saghas
Saghas
Cycle head press set suitable for 1 "and 1 1/8" ball head.
- Ballhead Cup press for pressing the outer head cup with bullet guidance
- Max. Baller head length: 200 mm
The tool is to squeeze the lower and upper cup evenly into the head tube. Before use, it is highly recommended to check whether the cup fitting is not damaged. If this is the case, adjust the size with the head cutter.
Tip: Put some fat on the head tube to be squeezed and the Lower Scale and it is not only easier, but is also better for the tools.
Cycle 720009
With This Tool the Top and the Bottom Head Cup Will Be Pressed Into The Steerer Tube SimultaneUously. Scope of Delivery: - Tool Holder with T -Handle, - Trapezoidal Thread Spindle 360mm, - Press Bush Pair, - Threaded Sleeve, - thrust Bearing. Preparation: Screw the trapezoidal thread spindle with the side, which has a fine thread, into the tool Holder. Put the thrust bearing and then one of the press bushes on the spindle. Use: Place the Top Head Cup on the Press Bush and Insert the Tool Into The Steerer Tube. Place the bottom head cup on the other press bush and put both of them on the spindle of the tool. Afterwards Screw the threaded Sleeve on the trapezoidal therad of the spindle. Rotate the Tool Holder and Start to Press the Head Cups. Pay Attention, that the Cups are not getting jammed duration the work. Before you start to press the head cups, check the diameter tolerance of the cup seat in the frame. You might need to correct the size by Milling and Facing the Steerer Tube First. Use corresponding head tube facing tools (code: 720005; 720006; 720210). Tip: Put some lubricant on the head cups to be pressed. It will make the work Easier and Safe the Tool.
Article number: 7720009
EAN: 8590831240239
Brands: Cycle
Type of tools: ball head
Colour.
Silver bluebal headcup press for pressing the outer head cup with ball guide for 1 inch and 1 1/8 inch cycle ball headcup press 1 and 1.1/8 cpl cycle Balhead Cup press 1/1
Íocaíocht & Slándáil
Modhanna íocaíochta
Déantar do shonraí íocaíochta a phróiseáil go sábháilte. Ní stórálaimid sonraí cárta creidmheasa agus níl aon rochtain againn ar shonraí do chárta creidmheasa.
Ceisteanna coitianta
An féidir liom íoc ina dhiaidh sin?
An féidir liom íoc ina dhiaidh sin?
Braitheann sé seo ar an
Modh íocaíochta a roghnaíonn tú ag an tseiceáil, déanaimid iarracht tacú leis an oiread agus a
indéanta
An féidir liom m'ordú a phiocadh go pearsanta?
An féidir liom m'ordú a phiocadh go pearsanta?
Díríonn Tormino ar
Loingsiú ar fud an domhain ar fad, as a leanann ilstórais agus mar sin
Gan ach tacú le loingsiú chuig do sheoladh soláthair.
An féidir míreanna éagsúla éagsúla a chur sa loingsiú céanna?
An féidir míreanna éagsúla éagsúla a chur sa loingsiú céanna?
Mar gheall ar an méid míreanna éagsúla atá againn ar díol is féidir leis tarlú go roinnfear d'ordú i pacáistí éagsúla, fanfaidh an táille loingseoireachta mar an gcéanna.
An féidir liom táirge a thabhairt ar ais?
An féidir liom táirge a thabhairt ar ais?
Sea! Is féidir aon earra a chur ar ais laistigh de 30 lá tar éis an ceannach a cheannach agus i bpacáistiú bunaidh. Chun mír a thabhairt ar ais beidh ort an táille loingseoireachta áitiúil a íoc ar ais chuig ár stóras fillte.
Cathain a bheidh mír díolta amach ar ais i stoc?
Cathain a bheidh mír díolta amach ar ais i stoc?
Braitheann sé seo go leor ar an mír atá i gceist, cuid acu ag dul as uainíocht, d'fhéadfadh daoine eile teacht ar ais i stoc níos déanaí. Thig leat teagmháil a dhéanamh go support@tormino.com don stádas ar mhír ar leith.
