Vidaxl weed brush Electric 140 W green

This powerful electric weed brush is ideal for removing weeds or moss between plates and blocks, along paths and for other external surfaces.

The weed killer comes with a nylon brush for light vegetation and a metal brush for coarser dirt. In addition, it is equipped with a transparent safety cap, a power cable and a built -in wheel to let the brush slide along edges for a more extensive cleaning. The design of this weed killer is compact, making it easy to store.

• Color: Green
• Diameter Brush: 10 cm
• Food: 230 - 240 V ~, 50 Hz
• Power: 140 W
• Unloaded speed: 1,200 rpm
• Cable length: 35 cm (VDE plug)
• With a clear safety cap
• A nylon brush and a metal brush are included

WARNING! Read all safety warnings, instructions, illustrations and specifications that are supplied with this electrical tool. Keep all warnings and instructions for future use. Keep the workplace clean and well lit. Do not use electrical tools in explosive environments, such as in the presence of flammable liquids, gases or dust. Keep children and spectators remotely during the use of electrical tools. The electric tool plugs must match the socket. Never change the plug in any way. Do not use adapter plugs with grounded (ground) electrical tools. Avoid physical contact with grounded or grounded surfaces, such as pipes, radiators, stoves and refrigerators. Do not expose electrical tools to rain or damp conditions. Don't abuse the cord. Never use the cord to wear, pull or disconnect the electrical tools. Keep the cord away from heat, oil, sharp edges or moving parts. Use an extension cord that is suitable for outdoor use when operating electrical tools outdoors. If it is inevitable to use electric tools in a damp location, use a grounded electric circuit (RCD) protected system. Stay alert, take a good look at what you do and use common sense to operate electrical tools. Do not use electric tools if you are tired or under the influence of drugs, alcohol or medicines. Use personal protective equipment. Always wear eye protection. Prevent unintentional switching on. Make sure that the switch is in the out position before connecting the tool to the power source and/or battery pack, and before picking up or wearing the tool. Always remove an adjustable key or key before switching on the electrical tools. Reik not too far. Ensure a good position and balance at all times. Wear suitable clothing. Do not wear loose clothing or jewelry. Keep your hair and clothing away from moving parts. If there are devices for connecting dust extraction and collective facilities, make sure that they are connected and used properly. Don't let the familiarity you have by using regular tools, and never ignore the safety principles of tools. GPSR