Vidaxl Wall bracket for swivel arm 78 cm

This wall bracket is the ideal mounting for the swivel arms of steel wire branches.

This bracelet is made of quality steel and can be taxed up to 1,000 kg. The wall bracket gives the swivel arm the necessary distance to the wall. As a result, the swivel range of almost 180 ° is retained without the winch touching the wall. Thanks to the pre -drilled holes, the wall bracket can easily be attached to the wall. Confirmation screws are included in the delivery.

• Color: Red
• Material: Steel
• Total length: 78 cm
• Inner length: 52 cm
• Thickness steel: 3 mm
• Maximum load: 1,000 kg
• Assembly required
• Delivery contains:
• 1 x Wall bracket
• 8 x screw

The product must be attached to the wall with 8 m12x120 mm expansion screws. Make sure the wall is a massive supporting structure. Solid walls offer strength and stability. The wall must be made of massive bricks, stones, concrete and reinforced concrete. The reinforced concrete and aerated concrete must be layered. The support wall must have a strength structure, without cracks. The thickness must be at least twice as much as the length of the expansion screw, the thickness must be more than 22 cm (220 mm) and the structure must be able to carry more than 1.5 tonnes of weight. Do not mount the product on steel plates or frames or on walls that consist of hollow or perforated bricks, nor on walls with cross bars or on other non-load-bearing walls. Before use, check that all mounting screws are properly secured. The parts of the bracket and the bracket itself are not allowed to show cracks. Not overloaded. Overlay is strictly forbidden. Do not lift people or animals. It is strictly forbidden to raise people with this pulley. Do not stand under the pulley, to prevent accidents! Inexperienced persons and people who are not familiar with the safety instructions may not use the product to prevent accidents. Important: Only electronic hoists are allowed. GPSR