Heatfan 4 - Radiator fan solo - White + Touch sensor

Article number: 8721008756134 View everything from Heatfan> View more: CV boilers> Heat Fan - With the Heatfan Radiator Ventilator you upgrade your heating system. These powerful, energy -efficient fans are designed to spread the warm air that is generated by your radiators faster and more efficiently through the room. The result? An evenly heated room and a lower energy bill! The silent radiator fan is suitable for all radiators and convectors and can be placed in an instant. With Heatfan you can save considerably: around 15-20% with outliers up to 30% on the amount of gas for heating your house. The Heatfan 4 Solo is suitable for radiators/convectors of 40 to 70 cm.  Advantages of Heatfan Radiator Ventilators Universal, fits on every radiator/convector Saving up to 30% on your gas costs highest quality fans, no sound all heat fans are modulating and the speed to the heat becomes faster and more efficiently Serve in the room Radiator Radiator how does the heat fan work work?  The radiator fan accelerates the air flow along the radiator by blowing. As a result, more cooler air flows along the radiator, which therefore warms up faster. The Heatfan automatically comes to a radiator temperature of approximately 24.3 ° C and out at 25.4 ° C. The Heatfan consumes very little electricity, a maximum of 1 kWh per year. This amounts to around € 0.25 per heat fan per year. The sensors of the Heatfan switch off the fans at the desired room temperature. With the built -in modulator, the fans start turning faster and softer, depending on the temperature. With the enlargement of the air flow and the ciculating heat, the thermostat switches off earlier and less energy will be used in proportion. All Heatfan parts have been developed with a minimum lifespan of 50,000 hours. This means that when the Heatfan is 50% of the time in continuous use, the radiator fans last 11.5 years.   How quiet are the Heatfan Radiator Ventilators? The Heatfan is super quiet, under 20 dB. For comparison: a ticking clock makes 30 dB of sound. The fall of a tree leaf is 10 dB.   How does the Heatfan Touch sensor work? The newest sensor from Heatfan has an advanced technology, which means that the fans switch off automatically when the radiator is a temperature of 25.3 ° C. The red LED light on the sensor indicates whether the fans are active. Radiators gradually warm up and slowly cool off again. Constantly blowing the fans at one speed does not take this dynamic into account and often leads to unnecessary noise nuisance, cold draft and a rocking indoor climate. Modulating Blowing offers a smart solution. All heat fans are equipped with technology that automatically adjusts the bladder speed to the heat of the radiator. The touch sensor ensures that the fans start blowing harder when the radiator gets warmer, and turn slower and finally switch off as soon as the heat decreases. This way the warm air is spread evenly.  The touch sensor has different positions with which you set the desired speed: 1. Green low speed supply temperature> 60 ° C 2. Yellow low/medium speed supply temperature 50- 60 ° C 3. Orange medium/high speed supply temperature 40 - 50 ° C 4. Red high speed supply temperature <40 ° C is out of 40 ° C. Product specifications item description Article number 8721008756134 Version Solo Number of fans 4 Color White Number of Units Quattro (4) Country of origin Netherlands Manual Heatfan with Touch Sensor.pdf Specifications: Dimensions Product: 39cm switches automatically on/off: 220/240. output voltage /current: 12VDC - 1AMP IP Value: IP40 Power: max. 1W flow M3 /H: Max. 86m3 lifetime: 70,000 hours of sound per fan: 14.5 dba warranty: 2 years electronics min./max. Temp.: -30 to +85 C Content set: 1x Heatfan 4 1x adapter (200 cm) 1x Touch sensor + cable 125cm 1x manual NL guideline quantity: Heatfan's advice is to place one heatfan 4 per 60 cm radiator. At very low supply temperatures (below 35-40 ° C) we recommend one heat fan 4 per 45-50 cm.