Speedcomfort Radiator Ventilator - DUO - SET

Article number: 8719324414654 View all of speedcomfort> View more: Radiator fan> Speed comfort Radiator fan duo - complete set The normal radiator heats the cold air in the room. The warm air then automatically rises automatically, so that there is room for colder air at the radiator. The warm air is then not really evenly distributed by the room. The SpeedComfort Radiator Ventilator solves this problem by blowing the air into the space faster and evenly. This makes the room heat up faster. This way you can set the temperature a few degrees lower and you quickly save on your gas bill! You place the fan between the two plates at the bottom of the radiator. Because of the magnets, the fan stays in place. You then connect the fan. As soon as the radiator is 35 degrees or warmer, the fan jumps on. At temperatures below 25 degrees, the fan goes out again. The fan is therefore never on if the room is not heated. This fan can also be used for convectors. You then place the fan with legs on the convector. The housing of speed comfort is made of bio-based material. Content of this set: 2x speed comfort (34 cm L x 7 cm B x 2.5 h) 1x Adapter 12V, cord length 1.80 m 1x external thermostat switch with magnetic mounting, cable tilt 60 cm 1x torque cable 30 cm product specifications Radiator fans - Duo - Set number 871932414654 version DUO Number of fans 3 Color white type Radiator double plate, double plate Small, single plate, Convector Number of Units Duo (2) Land of origin Netherlands Manual Speedcomfort1.pdf Suitable for all radiators and convectors, thanks to the built -in accessories and the Bugels and the Bugels can be adjusted and the Bugels and the Bows. Three radiator fans are suitable for radiators and convectors with a width of 120 cm.   How many speedcomforts do I need? One speed comfort moves approximately 30 m³ of air per hour. Usually it is enough to circulate all air in a room once an hour. One speed comfort is sufficient for a small (sleeping) room (approx. 12 m2). You need several for a larger room. Calculation example to determine the need: a living room of 5 x 8 x 3 m (B x L x H) has a volume of 120 m³. You then need four speedcomforts and opt for a trio set with expansion set or two duo sets.   When does the speed comfort start? Speedcomforts enter into a fixed temperature of 33 ° C. They go out again at 25 ° C. They switch off again at 25 ° C.   Does the speed comfort fit all radiators? Speedcomforts can be used universally on most radiators and convectors. Old cast iron rib radiators are less suitable for speed comfort. You can put them with your feet on the floor underneath if they hang with cable ties underneath. Not really nice, but it works.   What are the dimensions of the speed comfort? Length - 34 cm width - 7 cm height - 2.3 cm How much noise makes the speed comfort? The noise level of a speed comfort is less than 20 dB (A). That is quieter than rustling leaves. Do you still find the sound annoying? Contact us. We also have an adapter with a slightly lower voltage. This makes the fan running slightly slower, which also reduces the sound.   How much electricity does the speed comfort use? The fans are extremely economical. Based on 1200 business hours per year, a speed comfort consumes less than 0.32 euros per year. The adapter is loss -free. If the SpeedComforts are not in operation, the adapter does not use electricity. (For comparison: if you leave a 'normal' adapter in the socket for a year, you are about 12 euros poorer in electricity).   How do I confirm a speed comfort? Attaching a speed comfort is very easy thanks to the magnetic slider At the top. With a small adjustment they are suitable for most radiators or convectors and they simply click. Then attach the temperature sensor, also with magnets, near the hot water supply on the radiator (usually with the on/off button). Now plug the adapter into the socket. For radiators with two or three plates and a distance of at least 7 cm between the plates, attach the speed comfort with the magnetic sliders as they come out of the package. The magnets automatically click on the iron of the radiator. If the distance between the radiator plates is less than 7 cm, you can hang the speed comfort under the radiator. Pull the magnetic sliders out of the rail, turn them up with the magnets and push them back. Now you can attach the speed comfort under the radiator. For a radiator with one plate you also turn the magnetic sliding, but now all four magnets are on one side. If you have a convector or convectornis, you will find four feet on the bottom of the speed comfort that you can press in the appropriate holes. Environmental information about radiator fan - DUO - Set The Radiator delivers more power so that the water in the central heating system can be reduced to 60 degrees. If the installation is also adjusted water -sided, you save up to 30% on your gas bill. And that saves a lot of CO2 emissions. Milieu Centraal calculated that we emit 4.5 million tons less CO2 annually if 70% of households will use it.