Ubbink Swimming pool filter set 400 with TP 50 Pomp 7504642

This Ubbink swimming pool filter set 400 with pump TP 50 is designed to perform the filtration for many types of swimming pools. This pump and filter system is designed as a cheap maintenance option to keep your swimming pool water clean.

The principle of sand filtering is as follows: the swimming pool water is sucked out of the pool (skimmer/vacuum connection point) by the pump, then via the 6-way valve, depending on the type, sent to the tank where the filter medium (sand in this case) is located. The water runs through the sand under pressure. This removes most impurities before it goes through the sieve and returns to the valve through the collection tube. It is eventually taken back to the swimming pool. The swimming pool filter set 400 has 6 functions: winter, filtration, washing, rinsing, circulation and out.

The set contains a TP 50 pump and has a flow of max. 6.0 m³/h.

• Outdoor diameter of filter: 400 mm (16 ")
• Flow rate (8 m water column): max. 6.0 m³/h
• System pressure: max. 3.5 bar
• Capacity Silica Filterzand: max. 50 kg
• Multiple channels:
• Valve: 6 ways
• Sucking and backflow connections 1½ "
• Functions: winter / filtering / washing / rinsing / circulation / off
• Included Pump: TP 50
• Pump capacity: 0.50 HP / 0.37 kW
• Included accessories:
• 1 x filter and pump support
• 1 x Fasteners set (hardware)
• 1 x pump connection hose
• 1 x Printing meter
• 2 x hose connection (38 mm)
• 2 x hose connection (50 mm)

Safety instructions • The power supply must match the product specifications. Consult the local utilities for specific information about regulations, guidelines and more. Do not connect the pump if the power supply does not meet the specifications, regulations, standards or codes! A recognized electrician can offer you more information. • Electricity work may only be carried out by qualified electricians. • Never use an extension cord to connect the pump to the mains current. • The distance between the pump and the swimming pool must be at least 2 meters. • The power source (socket) must be at least 3.5 m away from the swimming pool. • The power supply of the pump must be equipped with an insulation transformer and an earth leakage circuit breaker with less than 30 mA residual current (class I swimming pool pump). • If the power cord is damaged, it must be replaced by a qualified person to prevent dangers. • Never use the cord to wear or pull the pump. • Switch off the power before the power cord is disconnected. Never work on the pump without first ensuring that the power is actually switched off. • This pump is not suitable for installation or use in wet conditions or under water. Do not install it in swimming pools and make sure that it cannot fall into water. • The pump is suitable for pumping water with a maximum temperature of 50 ° C. • Do not use the pump if it is not connected to a water source, regard this will lead to irreparable damage. • The pump is not suitable for use by persons with reduced physical, sensory or mental capacities or a lack of experience and knowledge, unless they are under the supervision of a person responsible for their safety or are instructed about the use of the product. Children must be supervised to ensure that they do not play with the device. • The filter may not be used if it is not correctly filled. The sand may not fill more than 2/3rd part of the tank. • Never touch the product with a wet body or wet hands when it is in operation. • Adults or children are not allowed to lean on the product or use it as support. Children must be supervised to ensure that they do not play with the product. • Chemiche products, such as chlorine, algecide or water removal agents in the sand filter, the filter basket or the skimmer, may never be cast or placed. This can damage the materials of the product or reduce its performance. • The swimming pool should not be used if the filter system is broken. • Damaged parts of the filter system must be replaced as quickly as possible. Only use parts that have been approved by the supplier. • If chemicals have been used to treat the swimming pool water, keep the recommended minimum filtering time to guarantee the health of swimmers, which depends on following health regulations. • Do not use devices that are visibly damaged! The power cord cannot be replaced. If the power cord is damaged, the device must be removed in a suitable manner.