Claresa basecoat poli 5ml

Poli Base is a hybrid base coat enriched with acrylic powder for an extra-strong, highly cured base. Poli Base makes nails more resistant to damage and ensures that manicures last longer. The acid-free formula is gentle on natural nails. Thanks to its thick consistency, the base coat is easy to apply and is also suitable for shaping and extending nails. The base is suitable for all nail types, from thin and weakened nails that need extra hardening to strong nails that require extremely good adhesion. Poli Base is a multifunctional product and is compatible with Claresa gel polish, builder gel, and acrylic gel. Density: 4/5. Directions: Apply the base coat to a matte and degreased nail plate. Apply in thin layers and cure under a UV/LED lamp. Allow at least 60 seconds of curing time. Then apply a layer of gel polish in a color of your choice and cure. Finish with a top coat and cure this also under a UV/LED lamp. Before applying the base coat, you can also use an acid-free primer. Read the full instructions for use and gel polish removal at the bottom of this page. Pros and cons Hardening transparent base coat with acrylic powder Makes nails stronger and more resistant to damage Thick consistency is suitable for building up nails Enjoy a beautiful manicure for longer Compatible with gel polish, builder gels, and acrylics Increases nail polish adhesion Quickly cured under a UV/LED lamp Instructions for use: Step 1: Clean and file nails into the desired shape. Step 2: Remove the shine from natural nails with a buffing block. Step 3: Push back cuticles with a cuticle pusher and, if necessary, remove them with cuticle nippers. Step 4: Clean and dust nails with a cleaner and wait until nails are dry. Step 5: Apply a thin layer of primer to nails. Wait until dry, which takes about 30 seconds. Step 6: Apply a thin layer of base coat and cure nails under a lamp. Depending on the base coat, cure the nails for 30-60 seconds under an LED lamp and for 2-3 minutes under a UV lamp. Step 7: Apply one thin layer of the hybrid gel polish and cure the nails under a lamp. Cure for 30-60 seconds under an LED lamp and for 2-3 minutes under a UV lamp. Step 8: Apply another layer of hybrid polish if desired and repeat the above step until the desired coverage is achieved. Step 9: Apply a top coat and cure the nails under the lamp. Cure for 30-60 seconds under an LED lamp and for 2-3 minutes under a UV lamp. Step 10: Then clean the nails with a cleaner to remove the sticky layer. Step 11: For extra care, massage the skin around your nails with a nourishing nail cream or cuticle oil. Note: More pigmented colors, such as black and white, may require a longer curing time. It is important to apply these layers thinly and, if necessary, apply a second coat and cure to achieve the desired coverage. Removing Claresa UV/LED Hybrid SoakOff Gel Nail Polish: Step 1: Carefully file off the top coat from the nails, Step 2: Soak a cotton pad in nail remover and place the cotton pad on the nails, Step 3: Make sure the nail plate is completely covered. You can use nail remover foil for this. Wrap your finger tightly in it, Step 4: Check after a few minutes whether the polish has softened. If this is not the case, wait a little longer, Step 5: Once the gel polish has come off, remove the residue with an orange wood stick, Step 6: After removal, use a hand cream and a cuticle oil for optimal hand care. Ingredients: Urethane Acrylate, Isopropylidenediphenylbisoxyhydroxypropyl Methacrylate, HEMA, Polymethyl Methacrylate, Isobornyl Methacrylate, Cellulose Acetate Butyrate, Hydroxycyclohexylphenyl Ketone, HEMA Phosphate, Ethyl Trimethylbenzoylphenylphosphinate, Silica Dimethylsilylate, Polyhydroxycarboxylic Acid Amides, PPG-3, Hydroquinone, p-Hydroxyanisole, Polyether Acrylate, Dipropylene Glycol Diacrylate, Polyester Acrylate +/- Mica, CI 77891, CI 74260, CI 74160, CI 60725, CI 45410, CI 77742, CI 77491, CI 77492, CI 77499, CI 19140, CI 77007, CI 77004, CI 16035 This item is for professional use only and may have a cause an allergic reaction.