The MASTER TL-D Eco lamp provides the same light output as a MASTER TL-D Super 80 lamp, while consuming less energy thanks to the use of specific phosphors and a special gas filling. Applications include schools, offices, government buildings and healthcare environments. Benefits • Easy individual lamp replacement for energy savings of more than 10% • Ensures that lighting installations meet the latest indoor lighting standards • Fairly high efficiency, both initially and during life, with good lumen maintenance Features • The only T8 fluorescent lamp that saves more than 10% energy in existing luminaires with electromagnetic ballasts • Lower energy savings with electronic ballast, depending on the type of ballast (current or power controlled) • Can be used as a direct renovation replacement in existing fluorescent luminaires for indoor applications that operate on electromagnetic or electronic ballasts • Uses the latest, highly efficient phosphors and special fill gas • High quality lighting with good color rendering (CRI>80) • Light output comparable to that of other TL-D Super 80 colors • Lumen maintenance and lifespan are the same as those of other TL-D Super 80 colors • Dimmable Application • For use in indoor applications with room temperatures higher than 20 °C (which means that the temperature around the lamp is more than 25-35 °C) • Primarily aimed at offices, schools and hospitals; secondary to retail, industry, supermarkets • Not recommended under the following conditions: - with air flow around the lamps - in luminaires with active air treatment (lamp temperature does not reach the required 25-35 °C, but only the room temperature) - in open luminaires/beams hanging close to air conditioning outlets or in cold air flows - in rooms above freezers (the temperature can easily drop below 20 °C) - in combination with VRUs (Voltage Reduction Unit – voltage regulator) Warnings and safety • It is extremely unlikely that a broken lamp will have any effect on your health. If a lamp breaks, ventilate the room for 30 minutes and clean up the shards, preferably with gloves. Place the shards in a sealed plastic bag and take it to your local waste facility for recycling. Do not use a vacuum cleaner.