Falcon Eyes Flexible Bi-Color LED panel RX-18TD 45x60 cm

Unfortunately! This product is no longer available. You find here The new version.

The Falcon Eyes Flexible LED panel RX-18TD consists of 504 LEDs. This flexible LED mat has a CRI value of 95. With this new technology it is even possible to roll your LED mat as a cylinder, which you can then use for 360 ° Panorama Photography. The light intensity is continuously adjustable to 100%. With the controller you can set the color temperature between 3000K and 5600K. You can attach the mat to the supplied X-rod, giving you a rectangular LED panel. With the supplied Velcro you can attach the mat to infinity. Because the flexible LED RX-18TD MAT is only 10 mm thick and weighs only 0.5 kg, you can easily take it on location. The flexible mat is splash -proof. The mat can be used both on mains and with V-mount battery, which you can find under the heading "Optional Accessories".

Application RX-18TD

The RX-18TD is suitable for product and portrait photography. You can easily take the RX-18TD with you, making it ideal for photography on location.

Unique characteristics:

• CRI value of 95
• Splash -proof
• 3000K-5600K
• Radiation angle 10-360 °
• 100W
• 504 LEDs

Wireless communication:
By means of the control panel on the back of the Sophiez, LPL and RX Lamps you can control the lamps at the same time with one control panel. All you have to do is put the lamps on the same channel (A/B/C/D/OFF), after which you can use one of the lamps as a control panel for the entire group. If you have different types of lamps from these series, you can also control them with only 1 control panel. For example, it is also possible to make two sets and to control both of these by putting them on different channels.

DMX Optional
With the controller that comes standard you cannot control the RX-18TD panel via DMX. If you would like to use the panel with DMX, you can choose a different controller, the CX-18TDX (see optional accessories).

Use of the Velcro

With the LED panel you will receive various strips of Velcro. You use the standard black Velcro to attach multiple LED panels to each other. You use the black velcro with holes to attach a rope to the LED panel so that you can hang the LED panel somewhere. You use the white Velcro to attach the LED panel to the scenery of your car.