Schütte Bad- Shower mixer thermostatic Vico Chrome

The high-quality, user-friendly thermostatic bath/shower mixer Vico van Schütte is a perfect choice for every bathroom.

The bathroom mixture crane is distinguished by a replaceable thermostat element and temperature distribution with child protection at 38 ° C. Thanks to the chromed surface, this mixer has a reflective shine. The construction of solid brass makes the bathroom tap very durable.

The mixer is easy to install and clean.

• Color: Chrome
• Material: brass
• Finishing: chromed
• Dimensions: 25.2 x 7.2 x 3 cm (L x B x H)
• Replaceable thermostat element
• ½ "(Ø about 1.9 cm) Ceramic interior and shower hose connection
• Temperature distribution with child protection at 38 ° C

Safety information · Have the installation only carried out by experts. · Beware: water damage! Close the water supply before installation. · Make sure that all gaskets have the right size. · These faucets are not suitable for use at low pressure and for small electric boilers. · We recommend installing a filter in the device, or at least to use corner valves with filter, to prevent strange materials that can damage the upper parts of the valves. · This tap is only intended for household use! Only suitable for use in rooms with a temperature of more than 0 ° C. If there is a chance of frost, close the water supply and let the tap drain. · If the tap has not been used for a long time, we recommend that the water run for a while before you use it as drinking water. · Be careful when you use the hot water. Danger of burns! · Incorrectly installed connections can cause water damage! · Despite careful production, the product can have sharp edges. Be careful! Drain Your washbasin tap is supplied in a massive package to protect it against transport damage. The package consists of recyclable materials. Drain them in an environmentally conscious way. Do not throw the product at the end of its lifespan in the residual waste. Ask the municipal administration about the possibilities for environmentally friendly drainage. Technical data · flow pressure: recommended as 1.5 bar. Install a pressure regulator at more than 6 bar. · Water temperature: max. 80 ℃. · Water connection: Warm - Left / Cold - Right a Installation instructions · Loosen the nozzle after installation of the tap. Then let the pipe and tap (hot/cold water supply) go well for a while, to rinse infections (chips and hempresidu). Then turn the nozzle back on the tap. · We offer no guarantee in the event of incorrect installation and the resulting damage! · After the first use, thoroughly check all connections to ensure that they are properly stuck. Sanitary cranes care instructions require special care. Therefore, follow the following instructions: · Chrome surfaces are sensitive to lime -losing agents, acid -containing cleaning products and all types of abrasives. · Never clean colored surfaces with abrasive, corroding or alcoholic agents. · Only clean your taps with clear water and a soft cloth or sea cloth. If the care instructions are not followed, surface damage is to be expected. This makes warranty claims invalid. Do not forget to regularly screw the nozzle loose to remove any limescale and strange materials. In the event of severe infection, it is recommended to replace the nozzle. Maintenance · A cartouche is a replaceable part and may have to be replaced every 1-2 years if the water contains a lot of lime or dirt. Buy spare parts from the local retailer. · Regularly check all connections for leaks and visible damage. · In case of leaks or visible damage to the fitting or connection hoses, they must be checked directly by a professional and, if necessary, be replaced. Disassembly · Close the water supply before you dismantle the product. · Note the outflow of residual water. · Disassemble the product according to the assembly instructions in reverse order. The illustrations should be considered figurative demonstrations, the actual product may differ from the illustrations. Subject to technical adjustments. Franz Joseph Schütte GmbH guarantee map offers a factory warranty for the product you have purchased in accordance with the warranty conditions stated below. Your legal guarantee based on the purchase contract with the seller and your legal rights are not affected Because of this warranty. Guarantee conditions: 1. Size of the warranty. Franz Joseph Schütte GmbH offers a guarantee of correct material quality and material processing in accordance with the intended purpose and professional assembly, tightness and function of the one -hand mixting technology. The following is not covered by the warranty: · Corrosion in the nozzle (aerator). · Cartouche. · Damage due to incorrect assembly, incorrect application and incorrect use. · Damage due to external influences such as fire, water and chemical influences. · Mechanical damage caused by accidents, falls or other battle effects. · Namen or deliberate destruction. · Normal wear or defects caused by poor maintenance. · Damage due to repairs by an unauthorized person. · Incorrect treatment, insufficient maintenance and the use of unsuitable cleaning agents. · Chemical or mechanical influences during transport, storage, connection, repairs and use of the product. 2. Warranty. The warranty refers to, depending on our choice, free repairs or free delivery of extra parts or a product of the same quality when returning the defective part or product. If the model in question is no longer produced, we retain the right to choose a replacement product from our range that is most similar to the returned model. Replacement products and parts become our property. When the product is returned, the purchaser bears the costs and risks of the transport. The reimbursement of costs for dismantling and assembly, inspection and claims with regard to lost profit and damage are excluded from the warranty, as well as further claims with regard to damage and losses of any kind that have been caused by the product or use it. 3. Submission of warranty claim. The warranty claim must be submitted to Franz Joseph Schütte GmbH within the warranty period by providing the original proof of purchase. Only applicable to the country in which the crane was purchased. 4. Warranty period. The warranty period is stated on the packaging label. In the event that no specific warranty is stated for a specific product, the warranty period is always 2 years from the purchase date, whereby the date on the proof of purchase is binding. For all non-high-gloss chromed surfaces, such as bronze or colored surfaces, the warranty period is 1 year regardless of what has been followed on the package. The date on the proof of purchase is also binding for this. The warranty period for the product is not extended or renewed via warranty services. Guarantee services do not limit the warranty period unless a case where legal facilities and legal requirements for a disability are present. 5. The German law applies to this warranty, excluding the United Nations Convention on International Purchase Agreements regarding movable property (CISG). This guarantee card is only valid in combination with the original proof of purchase. "