Claresa Bonding Base for Gel 5ml

is a basecoat for optimum adhesion of Claresa Builder Gels. The Bonding Base for Gel is acid-free and guarantees a long-term, comfortable styling of the nails. The acid -free formula is soft for the nails and prevents the risk of irritation or damage. The Bonding Base is suitable for use with all Builder Gels from Claresa, such as the Soft & Easy Builder Gels. The unique formula of the Basecoat increases the adhesion with the gel, so you can enjoy a beautiful manicure for longer. The rubber-like substance is easy to apply and is easy to form for accurate application. Use: Apply the base coat to a demolished nail and distribute evenly. Allow to harden for at least 60 seconds under a UV/LED lamp. For even better results, apply a Primer from Claresa for the Basecoat. Plus- en minpunten Basecoat voor Builder Gel Langdurige houdbaarheid Zuurvrije formule is zacht voor de nagels Compatibel met alle Claresa Builder Gels Brengt gemakkelijk aan Gebruiksaanwijzing: Stap 1: Maak de nagels schoon en vijl ze in de gewenste vorm, Stap 2: Verwijder de glans van de natuurlijke nagels met een polijstblok, Stap 3: Duw de nagelriemen naar achteren met een bokkenbootje en verwijder ze eventueel met een Swimlet tongs, Step 4: Clean the nails and dust -free with a cleaner and wait until the nails are dry, Step 5: Apply a thin layer of primer to the nails. Wait until it is dry, this takes about 30 seconds, step 6: apply a thin layer of base coat and hard the nails under a lamp. Depending on the Basecoat 30-60 seconds under an LED lamp and 2-3 minutes under a UV lamp, step 7: Apply one thin layer of the hybrid gellak and hard the nails under a lamp. 30-60 seconds under an LED lamp and 2-3 minutes under a UV lamp, step 8: If desired, apply a layer of hybrid paint and repeat the above step until the desired coverage is reached, step 9: apply a topcoat and hard the nails under the lamp. 30-60 seconds under an LED lamp and 2-3 minutes under a UV lamp, Step 10: Massage the skin around your nails as extra care with a nourishing nail cream or cuticle oil. Note: More pigmented colors, such as black and white, may require a longer curing time. It is important to apply these layers thinly and, if necessary, to paint and harden a second time to achieve the desired coverage. Removing the Claresa UV/LED Hybrid Soakoff Gel nail polish: Step 1: Carefully file the topcoat off the nails, Step 2: Soak a cotton pad in nail remover and place the cotton ball on the nails, Step 3: Make sure that the nail plate is completely covered. You can use nail remover foil for this. Wrap your finger firmly here, step 4: Check after a few minutes if the paint is loose. If this is not the case, wait a little longer, step 5: When the gellak is released, remove the remains with an Orange Woodstick, step 6: After removing, use a hand cream and a cuticle oil for the optimum care of the hands. Ingredients: urethane acrylate, isopropylid dingifenylbisoxydroxydroxypropylmethalat, Hema, isobornylmethacrylate, cellulose acetate butyraat, hydroxycycloexylphylphylphylphylphylphaat, ethylphate, hema phosphate, ethylphose, ethylphosis, eth stylish stylish stylish stylish fouchesphate, phosphatate, phosphatefate, phosphatefatefatefate, SiliciumdioxideDimethylsilat, polyhydroxycarbonic amids, PPG-3, Hydrochinon, P-hydroxyanisol, polyetheracrylate, dipropylene glycoldiacrylate, polyesteracylate +/- Mica, CI, CI, CI, CI, CI791, CI, CI791, CI7891, CI, CI791, CI7891, CI7891, CI7891, CI01691, CI01691, CI016911691169116911691169116911691691 60725, CI 45410, CI 77742, CI 77491, CI 77492, CI 77499, CI 19140, CI 77007