2-component foam for ultra-fast installation without propellant. Cuttable after 5 minutes.Special characteristicsVery fast curing, independent of humidityHigh dimensional stability (no shrinkage or post-expansion)High insulation value, thermal and acousticExcellent installation propertiesApplicationInstallation of windows and doorsInstructions for useSubstrate clean, dry, grease and dust-free. Treat porous substrates with primer 100. Position the door. Place the attached cardboard shims at the installation points. If necessary, tape off and cover the substrate and adjacent material. Processing temperature: +10°C - +30°C. Ambient temperature: +5°C - +30°C. Open the cartridge, attach the static mixer, and place it in the gun. Attach at a minimum of 6 points per door. If pauses are longer than 10 seconds, the static mixer may seize up. For deep joints, use a plastic aid. Immediately remove spilled foam with foam cleaner. Cured foam can only be removed mechanically with Soudal PU-Remover