Special featuresStrong adhesion in 15 minutesAlso bonds difficult materials: PC, Plexiglas, bluestone, EPDM,… Horizontal, suspended, and vertical bonding Cures from -10°C Easy to press Functional strength on porous materials after 15 minutes Functional strength on non-porous materials after 2 hours On dry and damp substrates Permanently elastic in the long term Almost odorless Free from toxic substances such as isocyanates, solvents, and phthalates Water and airtight Good UV resistance Technical dataBase: NTec hybrid polymers. Curing: Polymerization with (air) moisture. Odor: neutral. Density: 1.52 +/- 0.1 g/cm³. Processing temperature: -10°C to +30°C. Thermal stability: -40°C to +90°C / peak 200°C (max 20 minutes). Skin formation: 3-5 minutes. Tack-free: 6-10 minutes. Functional strength (hand-tight): Porous materials: 15 min Non-porous materials: 2-3 hours Full cure: 24h – 6mm | 7d – 14 mm Volume shrinkage after curing: < /> E-modulus 100% (DIN 53504 S2): 200N/cm² / 2.00 MPa. Elongation at break (DIN 53504 S2): 200%. Shore A hardness (DIN 53505): 60. Tensile strength (DIN 53504 S2): After 7 days: 270 N/cm² (= 270 kg/10cm²) After 3 months: 300 N/cm² (= 300 kg/10 cm²) Chemical resistance: Good: water, seawater, aliphatic solvents, oils, greases, diluted organic acids, alkalis Moderate: esters, ketones, aromatic solvents Poor: concentrated acids, chlorinated solvents Weather resistance: very good. Shelf life: 15 months from production. The first seven digits of the batch number form the production date: YY WW DDD, where YY = year (24 = 2024), WW = week, and DDD = day Safety measures: please consult the safety data sheet. Documents Safety information sheet