5410329336950

The HQ Power VDSSP10/8 Pro 255 millimeter subwoofer is ideal for installation in, for example, a speaker enclosure or in a car. This speaker is designed to reproduce and deliver the low tones of an audio system. The speaker is quite large, and its characteristics make it very suitable for reproducing bass tones. The speaker is connected to an installation at the rear via the connectors provided there. A cable can be connected to these connectors to supply the audio signal from an audio system. For installation, there are various mounting holes in the rim that you can use to screw in the speaker. **Technical specifications** This HQ Power VDSSP10/8 Pro 255 millimeter subwoofer has an impedance of 8 Ohm. The subwoofer can deliver a power (RMS) of 240 watts, and the maximum power of this item is 350 watts. The speaker has a sensitivity of 91 dB, and the magnet used weighs 850 grams. The frequency range of this woofer is a minimum of 28 Hertz and a maximum of 4,000 Hertz. The voice coil has a diameter of 1.5 inches, which is equivalent to 3.81 centimeters. The cone of this product is made of specially designed paper. This cone is attached to the outer edge with a rubber surround. **Additional information** The rubber surround is intended to allow the entire unit to move as effectively as possible during use. For the installation of the HQ Power VDSSP10/8 Pro 255 millimeter subwoofer, an opening with a diameter of 229 millimeters must be available. This opening must have a minimum depth of 110 millimeters for the mounting of the unit. This depth is necessary for the placement of the speaker and to properly connect the necessary audio cables at the rear. The speaker can be mounted at the corners and can be covered with a speaker grille for protection. Ask a product question