Special featuresWith the RUBI levelling corrector, the professional tile layer can quickly and accurately adjust tile joints. The levelling corrector is specially designed for working with slabs and large format tiles. These large-surface materials are very difficult to adjust once they have been laid. The strength of the double bonding generates a lot of resistance and the user has to exert great force and risks damaging the material.To facilitate this process, RUBI provides the professional with the levelling corrector. Equipped with two 150 mm diameter vacuum suction cups and suitable for a wide variety of surface finishes.The corrector is attached to two different tiles: the last one placed and the one before it. Once the suction cups are attached to both tiles, the tile joint width can be adjusted from 0 to a maximum of 40 mm.With the tile corrector, you can also adjust the horizontal level of the tiles in a range of 0 to 20 mm. The maximum lifting capacity is 100 kg.The levelling corrector does not in any way replace the use of tile spacers or levelling systems, as this tool is designed to allow small adjustments that, with smaller format tiles, would be done by hand, to be performed easily and quickly and with the least effort for the professional tile layer.When working with very large formats, it is always advisable to use two levelling correctors. This way, a much faster and more precise adjustment of the installed tile is achieved.Technical dataOuter diameter: 150 mmDimensions: 48 x 15 x 12 cmWeight: 3.61 kg