When converting the original turn signals to LED or halogen turn signals, the flashing frequency automatically changes. This can be remedied by connecting power resistors in parallel. For Micro 1000® / Rhombus DF / DF Dark and an indicator light, 1 resistor of 33 Ohm is additionally required for the taillight and 1 resistor of 7.5 Ohm for the brake light. Required resistor when converting to Kellermann turn signals (per turn signal) 21 Watt power consumption of the original turn signals: Micro 1000® Halogen - 10 Ohm, Micro 1000 / Micro Rhombus (yellow, white, Dark, DF, PL, Extreme) - 7.5 Ohm, BL 1000 Halogen (yellow, white, SG) - no power resistor, BL 1000 LED (LED, Dark, PL) - 7.5 Ohm. Required resistor when converting to Kellermann turn signals (per side) 10 Watt power consumption of the original turn signals Micro 1000® Halogen - 10 Ohm, Micro 1000® / Micro Rhombus (yellow, white, Dark, DF, PL, Extreme) - 10 Ohm, BL 1000 Halogen (yellow, white, SG) - no power resistor, BL 1000 LED (LED, Dark, PL) - 10 Ohm Accessory type