4040849620676

This is a CAT6a patch panel for centrally terminating and patching 8 network connections within a compact network setup with a 1U height. This patch panel is used to centrally terminate fixed network cables and neatly patch them to active network equipment such as switches or routers. The LSA connection technology allows solid and stranded conductors to be connected without soldering or screws. It can be mounted in a 10-inch rack, but wall or desktop mounting is also suitable. The patch panel is electrically and structurally designed according to CAT6a specifications. This means that the connectors used, internal wiring, and shielding are designed for a maximum signal bandwidth of 500 MHz. Cable categories such as CAT5, CAT5e, CAT6, CAT7, and CAT8 can be mechanically connected because they use the same RJ45 connector form factor and wire gauge. However, with categories higher than CAT6a, the additional bandwidth and shielding of those cables will not be fully utilized, as the patch panel itself determines the technical upper limit. For optimal performance, the maximum certified support extends up to CAT6a. The RJ45 ports and the metal housing are equipped with electromagnetic shielding. This shielding is intended to reduce electromagnetic interference (EMI) from external electrical sources, thereby minimizing signal disturbances and supporting a more stable network connection. This patch panel is suitable for passively routing Power over Ethernet (PoE) within a CAT6a network installation. The panel itself does not supply power and contains no active components, but it does not interrupt the PoE voltage with correct termination and cabling. Specifications • Type: patch panel • Format: 10 inch • Category: CAT6a • Shielding: STP • Number of ports: 8 • Height unit: 1U • Connection 1: 8x LSA (Krone) terminal • Connection 2: 8x RJ45 female (8P8C) • Port numbering: yes • Bandwidth: up to 500 MHz • Supported data rate: up to 10 Gbit/s (depending on cabling and active equipment) • Cable diameter: up to 0.64 mm (AWG 22–26) • Wire type: solid and stranded • Wiring assignment standard: TIA 568A / TIA 568B • Housing material: metal, powder-coated • Mounting: suitable for 10-inch rack, wall, or desktop mounting • Color: black • Certifications: CE, WEEE Explanation of terms and standards used • CAT6a: Network category with a maximum certified bandwidth of 500 MHz, suitable for 10 Gigabit Ethernet. • Electromagnetic shielding: Structural measure to limit interference from external electromagnetic fields. • LSA: Connection technique where conductors are inserted into insulation displacement connectors without soldering or screws. • RJ45 (8P8C): Standardized network connector with eight contacts. • TIA 568A/B: Standard for wire assignment in twisted-pair networks. • 1U: Rack height unit of 44.45 mm. Package contents • CAT6a patch panel (8-port) • Mounting hardware Ask a product question