Gates voortandwiel carbon drive cdx

Product Description This front CDX belt drive sprocket from Gates for touring and off-road use has four arms and a bolt circle diameter of 104 mm. It is made of 6061 aluminium. Specifications:Application:All Mountain, City & Touring, Cross CountryTeeth:39 t, 42 t, 46 t, 50 t, 55 tMount:104 mm bolt circle diameter, 4-armTechnical Information:Width of the teeth:11 mmTooth division:11 mmMounting web thickness:3.1 mmOffset:3.1 mm (assembly surface), 1.55 mm (centre line)Inner Diameter:88 mmArm width:19 mmMaterial:aluminium (6061)Features:CDX level: high-end version for high loads and best performancesuitable for mud, sand, snow and ice as well as all roadsmiddle guide groove (CenterTrack)high mileageblack anodisedTechnology:Gates Carbon Drive System The main advantages of the Gates Carbon Drive system are cleanliness, smoothness and robustness. Urban commuters as well as mountain bikers, e-bike users or leisure riders benefit from the high mileage. Oil-stained or rusty chains are a thing of the past. Clean: No lubricant means no accumulation of grease and dirt. Smooth and silent operation: no metal-to-metal contact of the chains. Light: The whole system weighs less than a standard bicycle chain. No elongation: Belt does not need to be re-tensioned or replaced. Self-cleaning: CenterTrack and MudPort profiles are specially designed to repel mud, dirt, snow or other contaminants. Consistent efficiency: The drive boasts a long service life compared to that of a conventional chain, where efficiency is significantly reduced by wear or dirt. Installing a Gates Carbon Drive Belt Drive requires a specially-made frame, therefore we strongly advise against using one to modify a conventional framework. Models:39 tooth: Outer Diameter:134.8 mmManufacturer Number:CT11394AA 42 tooth: Outer Diameter:145.2 mmManufacturer Number:CT11424AA 46 tooth: Outer Diameter:159.3 mmManufacturer Number:CT11464AA 50 tooth: Outer Diameter:173.2 mmManufacturer Number:CT11504AA 55 tooth: Outer Diameter:190.7 mmManufacturer Number:CT11554AAContents:1 x Gates CDX 4-Arm Front Belt Drive Sprocket Manufacturer: Universal Transmissions GmbH Walkmühlenstraße 195 99974 Mühlhausen Germany shop@carbondrive.net Voortandwielen van Gates worden gebruikt in combinatie met een Gates riem (riem niet meegeleverd) in plaats van een ketting. Bekijk de Gates Carbon Drive Bicycle Calculator voor het bepalen van het juiste onderdeel. Gates hanteert 4 soorten productlijnen. Deze productlijnen worden vaak door Gates gebruikt om aan te tonen voor welke soort fietsen het onderdeel is. Dit product hoort bij productlijn: CDX: krachtige woon-werkverkeerfietsen, trekking-fietsen, mountainbikes, bakfietsen en e-bikes, en extreme omstandighedenProductlijn: CDXMateriaal: 6061 aluminiumGates Artikelnummer: 740590 EAN-code: 4262558681049 Leveranciersnummer: 78980700-AM Winkelverpakking: Ja