Claresa rubber base coat 5ml 20

Rubber Base 20 is a strengthening base coat in a subtle yet bright pink with gold glitter. This flexible base coat provides extra strength to weak, brittle, and fragile nails. Its thick consistency evens out the nail surface and perfectly smooths out any imperfections. Moreover, the base coat doesn't spread over the cuticles, allowing you to easily build up your nail shape. The Rubber Base allows for nail extensions of up to 1 cm. Because the base coat evens out the nail color, neon and pastel shades applied over it are amplified and enhanced. Rubber Base 20 has a bright, light pink color enriched with gold particles. This makes it beautiful for a minimalist manicure and also perfect as a base coat that can be covered with any Claresa UV/LED gel polish. Density: 4/5. Claresa's Rubber Base collection features a wide range of colors that are perfect as a base for gel polish, but also look beautiful on their own for a natural-looking, minimalist manicure. The Rubber Base is also perfect as a base for a classic French manicure or trendy Milky Ombre nails. The color range ranges from colorless to milky, pink, violet, peachy, or even finishes with beautiful glitter. The possibilities are endless with Claresa Rubber Basecoat. The reinforced base allows nails to grow without breaking or cracking. In addition to shine and beautiful color, the Rubber Base collection gives nails the care they deserve. How to use: Apply the basecoat to a matte and degreased nail plate. Apply in thin layers and cure under a UV/LED lamp. Cure for 120 seconds with a UV lamp and 30 seconds with an LED lamp. To build up the nails and create a curve, scrape the basecoat along the bottle and apply it in floating, circular motions over the first thin layer of Rubber Base. Make sure it is nice and smooth before curing so you don't have to file afterward. Then apply a topcoat for a minimalist manicure or choose a gel polish color of your choice and finish with a topcoat. Read the full instructions for use and gel polish removal at the bottom of this page. Pros and cons Flexible and strengthening rubber base coat for manicures Bright light pink with gold glitter Provides extra strength to weak, brittle and fragile nails Thick consistency evens out the nail surface and color Nail extension up to 1cm possible For a minimalist manicure or as a perfect base for gel polish Enhances the color of pastel and neon gel polish Lets nails grow without cracking or breaking Quickly cured under a UV/LED lamp Extensive range of colors Please note: the color may differ from reality. This is due to the color settings of the screen or the lighting in which the photo was taken. The color may also differ due to the top coat, such as when using a matte or a glossy top coat. Instructions for use: Step 1: Clean the nails and file them to the desired shape, Step 2: Remove the shine from the natural nails with a buffing block, Step 3: Push back the cuticles with a cuticle pusher and remove them with cuticle nippers if necessary, Step 4: Clean and dust the nails with a cleaner and wait until the nails are dry, Step 5: Apply a thin layer of primer to the nails. Wait until it is dry, this takes about 30 seconds, Step 6: Apply a thin layer of base coat and cure the nails under a lamp. Depending on the base coat 30-60 seconds under an LED lamp and 2-3 minutes under a UV lamp, Step 7: Apply one thin layer of the hybrid gel polish and cure the nails under a lamp. 30-60 seconds under an LED lamp and 2-3 minutes under a UV lamp, Step 8: If desired, apply another layer of hybrid polish and repeat the above step until the desired coverage is achieved, Step 9: Apply a top coat and cure the nails under the lamp. 30-60 seconds under an LED lamp and 2-3 minutes under a UV lamp, Step 10: Then clean the nails with a cleaner to remove the sticky layer, Step 11: For extra care, massage the skin around your nails with a nourishing nail cream or cuticle oil. Note: More pigmented colors, such as black and white, may require a longer curing time. It is important to apply these layers thinly and, if necessary, apply a second coat and cure to achieve the desired coverage. Removing Claresa UV/LED Hybrid SoakOff Gel Nail Polish: Step 1: Carefully file off the top coat from the nails, Step 2: Soak a cotton pad in nail remover and place the cotton pad on the nails, Step 3: Make sure the nail plate is completely covered. You can use nail remover foil for this. Wrap your finger tightly in it, Step 4: Check after a few minutes whether the polish has softened. If this is not the case, wait a little longer, Step 5: Once the gel polish has come off, remove the residue with an orange wood stick, Step 6: After removal, use a hand cream and a cuticle oil for optimal hand care. Ingredients: dipentaerythritol hexaacrylate, hydroxypropyl methacrylate, HEMA, isobornyl acrylate, dimethylacrylamide, acrylic acid, bis(methacryloyloxyethyl) phosphate +/-CI 77891, CI 77491, CI 77492, CI 77742, CI 77510. This product is for professional use only and may cause an allergic reaction.