Balhead cup press 11 2 oversz. Cycle 720181
Balhead cup press 11 2 oversz. Cycle 720181 Raigned ja lähetetään heti, kun se on takaisin varastossa.
- PRESSING BALL HEAD Cups quickly and efficiently
- Suitable for upper and lower ball head cups
- Including all required tools
Toimitusaika: Order on workdays before 3 p.m., and we are still sending the article today.
Toimitusaika: Order on workdays before 3 p.m., and we are still sending the article today.
Radan koodi lähetetään sähköpostitse, jotta voit lähettää tämän lähetyksen Seuraa vain.
Noutojen saatavuutta ei voitu ladata
Kuvaus
Kuvaus
With the headset press 1.5 "you can press the upper and lower steering head cups at the same time in the head tube. The set is supplied with a tool holder with T-grip, a trapezoidal wire spindle of 360 mm, a pressbox couple, a screw bus and a pressure lider.
- Preparation: Screw the trapezoidal wire spindle with the fine thread side in the tool holder. Place the printing bearing and then one of the press buses on the spindle.
- Use: Place the upper ball head cup on the press bus and put the tools in the head tube. Place the lower ball head on the other press bus and place them both on the spindle of the tool. Then screw the screw bus to the trapezoidal wire of the spindle. Turn the tool holder and start pressing the ball cups. Make sure that the cups do not get stuck during work.
- Before you start pressing the head cups, check the diameter tolerance of the cup session in the frame. You may need to correct the size by first milling and surfacing the head tube. Use the corresponding head tube milling tool (code: 720147) for this.
- Tip: apply some lubricant to the ball cups to be squeezed. This makes the work easier and protects the tools.
Article number: 7720181
EAN: 8590831240246
Brand: Cycle
Type of tools: ball head
Net weight (g): 2630
Color: Silver blue
Maksu ja turvallisuus
Maksutavat
Maksutietosi käsitellään turvallisesti. Emme tallenna luottokorttitietoja, emmekä ole pääsyä luottokorttitietoihisi.
Usein kysyttyjä kysymyksiä
Voinko maksaa jälkikäteen?
Voinko maksaa jälkikäteen?
Tämä riippuu
Maksutapa, jonka valitset kassalla, yritämme tukea niin monta kuin
mahdollinen
Voinko noutaa tilaukseni henkilökohtaisesti?
Voinko noutaa tilaukseni henkilökohtaisesti?
Tormino keskittyy jhk
Lähetys koko maailmassa, mikä johtaa useisiin varastoihin ja siten
Vain tukeminen lähetys tarjoavalle osoitteeseesi.
Voidaanko useita erilaisia esineitä lähettää samaan lähetykseen?
Voidaanko useita erilaisia esineitä lähettää samaan lähetykseen?
Erilaisten tuotteiden määrän vuoksi voi tapahtua, että tilauksesi jaetaan useisiin eri paketteihin, toimitusmaksu kuinka Howver pysyy samana.
Voinko palauttaa tuotteen?
Voinko palauttaa tuotteen?
KYLLÄ! Mikä tahansa tuote voidaan palauttaa 30 päivän kuluessa ostamisen jälkeen ja alkuperäisessä pakkauksessa. Tuotteen palauttamiseksi joudut maksamaan paikallisen lähetysmaksun takaisin palautusvarastoon.
Milloin loppuunmyyty tuote on takaisin varastossa?
Milloin loppuunmyyty tuote on takaisin varastossa?
Tämä riippuu paljon kyseisestä esineestä, jotkut menevät pois pyörimisestä, toiset saattavat tulla takaisin varastossa myöhemmin. Voit vapaasti tavoittaa support@tormino.com tietyn kohteen tilalle.