4049759058012

This fiber optic patch cable is intended for making a short connection between a passive fiber optic interface and an active network port within a structured cabling environment in accordance with ISO IEC 11801. The cable is designed as a duplex connection with LC-duplex and ST connectors and is suitable for multimode OM1 applications. The connection is an LC-ST fiber optic connection and is suitable for use with standard fiber optic equipment such as switches, media converters, and patch panels. The LSZH jacket makes the cable suitable for installations where low smoke emission and halogen-free material are required. Specifications • Cable type fiber optic patch cable • Duplex design for simultaneous transmission and reception • Fiber type multimode 62.5/125 µm • Category OM1 • Number of fibers 2 • Connector side 1 LC-duplex • Connector side 2 ST • Connector standard IEC 61754-20 and IEC 61754-2 • Connector finish UPC • Connector material ceramic ferrule • Cable type I-V(ZN)H • Cable diameter 2.0 mm • Jacket material LSZH • Jacket construction zip-twin • Jacket color orange • Strain relief aramid yarn with attached bend protection • Maximum tensile strength 160 N • Bending radius dynamic 20× OD • Bending radius static 10× OD • Operating temperature -20 to 70 °C • Storage temperature -20 to 85 °C • Quality class multimode A/1 • EMI immunity complete insensitivity to electrical and electromagnetic interference • Test status 100% tested with individual test report IEC standards • IEC 60793-2 specification of optical fiber core and fiber structure • IEC 60793-2-10 definition of OM1 fiber type A1b • IEC 61754-20 definition of LC connector interface • IEC 61754-2 definition of ST connector interface • IEC 61753-222-2 performance class A/1 for multimode connectors • IEC 60754-1 halogen-free properties • IEC 61034-1 low smoke emission EN standards • EN 50265-2-1 flame retardant behavior of cable jackets • EN 50267-2-3 halogen-free jacket materials Explanation of terms • LC-ST fiber optic connection with an LC connector on one side and an ST connector on the other side • Duplex two separate optical fibers where one fiber transmits and the other receives • Multimode 62.5/125 µm fiber type with a larger core for older multimode installations • LSZH jacket material with low smoke emission and no halogen-containing substances • Ceramic ferrule precision holder that precisely centers the optical fiber for stable signal transmission • EMI immunity signal transmission via light without interference from electrical currents and magnetic fields • Bending radius minimum cable curvature to prevent additional attenuation and fiber damage • Bending radius static minimum bend after the cable has been installed and secured • Bending radius dynamic minimum bend during installation or movement of the cable • A/1 quality class quality class for multimode connectors with strict tolerances • I-V(ZN)H cable type European designation for halogen-free fiber optic cable for indoor installations General explanation of fiber optic cables • LC compact fiber optic connector with snap-in latch for high port density • SC rectangular fiber optic connector with push-pull latch for patch panels • ST round fiber optic connector with bayonet latch for older installations • E2000 fiber optic connector with protective cap for low reflection and extra safety • MPO / MTP multiple fiber optic connector for high fiber density in data centers • Simplex single optical fiber for data transmission in one direction • Duplex two optical fibers for simultaneous communication in both directions • Multimode fiber optic fiber type for short to medium distances within buildings • Singlemode fiber optic fiber type for long distances and backbone connections Explanation of OM categories • OM1 multimode fiber 62.5/125 µm suitable up to approximately 275 m at 1 Gb and approximately 33 m at 10 Gb • OM2 multimode fiber 50/125 µm suitable up to approximately 550 m at 1 Gb and approximately 82 m at 10 Gb • OM3 laser-optimized multimode fiber suitable up to approximately 300 m at 10 Gb, approximately 100 m at 40 Gb, and approximately 100 m at 100 Gb • OM4 improved laser-optimized multimode fiber suitable up to approximately 400 m at 10 Gb and approximately 150 m at 40 Gb • OM5 wideband multimode fiber with a 50/125 µm core, suitable up to approximately 400 m at 10 Gb and approximately 150 m at 40 Gb, designed for simultaneous transmission over multiple short wavelengths within a single multimode fiber according to shortwave wavelength division multiplexing Ask a product question