Plasto-elastic adhesive sealant based on acrylate dispersions for bonding SWS Inside Tape. For interior use only. Soudafoil 360H complies with DIN 4108-7 and is part of the Soudal Window System. Special features For interior applications only Ensures airtight connections in accordance with the requirements of DIN 4108-7 Very easy to apply Low water vapor permeability Colourfast and waterproof after curing Very good adhesion to many porous materials and aluminium Paintable after curing Solvent and silicone-free Application Particularly suitable for airtight bonding of window tapes and airtight building films such as SWS Inside Tape at window connections. Suitable for bonding tapes to each other and to most common substrates such as masonry, concrete, plaster, cement. Instructions for use Apply Soudafoil 330D, using a manual or pneumatic caulking gun, without interruption (= to ensure airtightness) in a bead of approx. 5 mm to the substrate. Place the SWS tape tension-free in the wet adhesive layer and press it down so that an adhesive layer with a thickness of 1 to 2 mm and a width of approx. 25mm is created. Preferably use a pressure roller. With this remaining adhesive thickness, the drying process of the adhesive is facilitated. Soudafoil 330D can be used at +5 °C to +35 °C; at temperatures below 5 °C and/or damp surfaces, SOUDAFOIL 360H is recommended. Soudafoil 330D can be removed from materials and tools with water before curing.