Eisl shower basket 22x18x13 cm chrome -colored

This stainless steel shower rack from Eisl is indispensable to keep your shower products within reach. The shower basket is easy to mount in the corner, without having to drill and without damage to the wall.

The sustainable suction cup with locking mechanism has a super strong suction. It is suitable for mounting on glass, mirrors, acrylic plates, marble, steel plate and other smooth and flat surfaces.

• Color: Chrome
• Material: Stainless steel
• Dimensions: 22 x 18 x 13 cm (L x B x H)
• Chrome finish
• Easy to install
• Hang up without drilling and screws

Safety information · In case the adhesive comes into contact with the eyes, rinse well with running water and soap. · After contacting the eyes well and contacting a doctor. · If swallowed, seek medical help. Drain Your product is supplied in a massive package to protect it against transport damage. The package consists of recyclable materials. Drain them in an environmentally conscious way. Do not throw the product at the end of its lifespan in the residual waste. Ask the municipal administration about the possibilities for an environmentally friendly drain. Installation instruction · Have the installation only carried out by experts. · Application: First clean all surfaces with a cleaning agent. The glue cannot be used for wallpaper, plasterboard, polyethylene (PE), polypropene (PP) and polytetrafluorethylene (PTFE, Teflon). Processing temperature + 5 ° C to + 40 ° C. · Beware of water damage! Before installation, check that there are no water pipes on the spot where you are planning to drill. · Warning - risk of electrocution! Before you are, check that there are no electricity cables on the spot that you can drill. Care instructions These products require special care. Therefore, follow the following instructions: · chrome surfaces are sensitive to lime -losing agents, acid -containing cleaning agents and all types of abrasives. · Clean colored surfaces never with abrasive, corroding or alcoholic agents. Dismantling · Glue application: Remove the back plate. Use a scraper to remove residues of silicone glue from the wall. · Disassemble the product according to the installation instructions in reverse order. 1. The illustrations are figurative representations, the actual product may differ. Subject to technical adjustments.