Claresa Rainbow Jello Base Coat Marine 5ml

is a sea blue semi-transparent base coat with shiny pieces of foil. With the Rainbow Jello Base collection from Claresa you can create the perfect manicure with one product. The collection consists of sunny rainbow colors that shine in different colors through the irisirende foil pieces in the gellak. The Jello Base collection is perfect as a summer manicure, for festival Nails or another party! The Jello Base collection has a medium -tunn consistency that easily applies. The formula is perfectly leveling and provides visually thin and natural -looking nails. The Jello Base has a very high adhesion that has been resistant to chipping and air formation for up to 3 weeks if applied correctly. The coverage of the colors can be built up by applying several layers. Use: apply the base coat to a matted and degreased nail plate. Apply in thin layers and hard under a UV/LED lamp. Maintains 120 seconds of hard time with a UV lamp and 30 seconds with an LED lamp. Then apply a topcoat. Read the full user manual and instructions for removing gellak at the bottom of this page. Plus and minus points glittering Turquoise Jello Basecoat Semi-transparent constructable coverage Basecoat and color in 1 iridescent foil glose in the light quickly hardened under a UV/LED lamp easily brings fades or does not chip very extensive range of colors Note: the color may differ from reality. This is due to the color setting of the screen or lighting where the photo is taken. The color may also differ due to the top coat, such as when using a matte or a shiny top coat. Instructions for use: Step 1: Clean the nails and file them in the desired shape, Step 2: Remove the shine from the natural nails with a polishing block, Step 3: Push the backrons backwards with a goat and remove them with a cut belt tongs, Step 4: Make the nails clean and dust -free: STEP TO THE NAMERS. Wait until it is dry, this takes about 30 seconds, step 6: apply a thin layer of base coat and hard the nails under a lamp. Depending on the Basecoat 30-60 seconds under an LED lamp and 2-3 minutes under a UV lamp. If desired, apply a layer of basecoat to build the intensity of the color. Hard out under the lamp, step 7: Apply a topcoat and hard the nails under the lamp. 30-60 seconds under an LED lamp and 2-3 minutes under a UV lamp, Step 8: Then clean the nails with a cleaner to remove any sticky layer, step 9: Massage the skin around your nails as extra care with a caring nail cream or cuticle oil. Note: More pigmented colors, such as black and white, may require a longer curing time. It is important to apply these layers thinly and, if necessary, to paint and harden a second time to achieve the desired coverage. Removing the Claresa UV/LED Hybrid Soakoff Gel nail polish: Step 1: Carefully file the topcoat off the nails, Step 2: Soak a cotton pad in nail remover and place the cotton ball on the nails, Step 3: Make sure that the nail plate is completely covered. You can use nail remover foil for this. Wrap your finger firmly here, step 4: Check after a few minutes if the paint is loose. If this is not the case, wait a little longer, step 5: When the gellak is released, remove the remains with an Orange Woodstick, step 6: After removing, use a hand cream and a cuticle oil for the optimum care of the hands. Ingredients: urethane acrylate, isopropylidsediphenyl bisoxyhydroxypropyl Methallate, HEMA, isobornyl methacrylate, cellulose acetate butyrate, hydroxycyclohexyl phenylbenzone, ethosphate, ethosphate, ethosphate, ethosphatate Phenylphosphinate, Silica Dimethyl Silylate, 2-Methylpropanol, Polyhydroxycarboxylic Acid Amides, PPG-3 , Polyamide, Phenoxyethanol, Polyether Acrylate, Dipropyleenglycoldiacrylaat, polyesteracrylaat, silica, hydrochinon, P-hydroxyanisol +/- CI 77891, CI 74260, CI 74160, CI 60725, CI 45410, CI 77742, CI 77491, CI 77492, CI 77499, CI 77000, CI 77004, CI 1605, ",5035," CI 15980, CI 15850 This article is only for professional use and can cause an allergic reaction.