Spray.bike frame builder's metal primer

Product Description Frame Builder's Metal primer by Spray.Bike - Primer for metal bike frames Frame Builders Metal Primer from Spray.Bike can be applied to raw metal bicycle frames, provides excellent protection against rust and offers the best hold for all Spray.Bike or other paint colours. Specifications:Designation:Spray Bike Acrylic Paint in AerosolApplication Area:frame, fork and all parts to be paintedFeatures:strong adhesion primer for Spray.Bike paintsideally suitable for steel, stainless steel, aluminium and titaniumno subsequent heat treatment necessarywith 400 ml a common bicycle incl. fork can be treated with one layeron steel frames the primer can be used as a modern alternative to Cold ZincApplication:use Spray.Bike only on clean, dry surfaceswear gloves, protective clothing and breathing maskalways paint outdoorsshake spray can vigorously for approx. 3 minutes before usetake 2-3 test sprays before usespray only with a spray can in vertical position (at least 20 cm spray distance)keep the spray can moving at all times during the spraying processallow primer to dry completely (approx. 20 minutes)paint with desired colour and treat further Manufacturer's Warning:Optimum ambient temperature while spraying: 20-25°C. Do not use Spray.Bike at outside temperatures below 10°C, above 35°C or at a relative humidity level greater than 75%. Keep the can well-protected from sunlight and ambient temperatures above 50°C/122°F.CLP Regulation Label: Signal Word:DangerHazardous Components:acetones, cylenes, 2-methoxy-1-methylethyl acetate Hazard Warnings:H222 Extremely flammable aerosol. H229 Pressurized container: may burst if heated. H315 Causes skin irritation. H319 Causes serious eye irritation. H336 May cause drowsiness or dizziness. Safety Information:P101 If medical advice is needed, have product container or label at hand. P102 Keep out of reach of children. P210 Keep away from heat, hot surfaces, sparks, naked flames and other sources of ignition. No smoking. P211 Do not spray on an open flame or other ignition source. P251 Do not pierce or burn, even after use. P280 Wear protective gloves / protective clothing / eye protection / face protection. P410+P412 Protect from sunlight. Do not expose to temperatures above 50 °C / 122 °F. P501 Disposal of contents/container in accordance with local / regional / national / international regulations. Manufacturer:Cosmos Lac AE 1 Pindou Street, Kallithea 17672, Athens. Greece Phone: +30 2109570222 Fax: +30 2109566671 factory@cosmoslac.com http://www.cosmoslac.com Models:400 ml: Nominal Amount:400 mlPackaging Type:spray canColour info:white:white to greyContents:1 x Manufacturer: Spray.Bike (Brick Lane Bikes) 118 Bethnal Green Rd London E2 6DG United Kingdom info@spray.bike Distributor: incubado GmbH Werner-von-Siemens-Str. 3-7 25479 Ellerau Germany hi@incubado.de