Product Description The Highline 7 125 mm dropper post by crankbrothers - with Quick Connect clamp The adjustable crankbrothers Highline 7 seatpost with 125 mm travel allows you to adjust the saddle height smoothly and reliably. It quickly returns to its start position and also scores with an uncomplicated setup. Its core piece is a self-contained hydraulic IFP cartridge with two chambers and internal floating piston. Thanks to the 2-bolt clamp with quick release head, the saddle can be replaced quickly. The whole thing is rounded off by a Jagwire cable, Igus bearings and Trelleborg seals of the highest quality. With its extremely low overall height, low weight and clean internal cable routing, the Highline 7 increases the fun of riding on any all-mountain adventure, enduro race or cross-country trip. Specifications: Application: Cross Country, Enduro, All Mountain Travel: 125 mm Diameter: 30.9 mm, 31.6 mm Length: 417 mm Setback: 0 mm Technical Information: Actuation: mechanical handlebar remote Cable Routing: internal Clamp: 2-bolt clamp Compatible Saddle Rails: 7 x 7 mm (standard) Material: aluminium (7075-T6) Approved For: Insertion Depth (max.): 242 mm Insertion Depth (min.): 100 mm Features: lower insertion depth suitable for many frames premium seals by Trelleborg exclusive plain bearings by Igus Jagwire cable and cable housing encapsulated hydraulic cartridge (2 chambers: gas and oil separately) with internal floating piston internal cable routing quick connection mechanism for easy cable installation linear actuator for quick return quill made of machine weight-reduced aluminium (10-15 g less than Highline 3) standard 2-bolt clamp w/ quick release 47 mm minimum construction height 286 mm maximum extension length 172 mm minimum extension length remote with especially flexible mount system available separately Maintenance Intervals: The maintenance intervals are dependent on riding style and geographical location. After every ride: Wipe dust and dirt from the seatpost, focusing on the seal area and the tip of the coil spring. Check the seatpost for any damage. Every 150-175 hours of riding time: Lubricate the internal components by unscrewing the collar, use coil-specific grease (never oil!) up to the sleeve under the collar and reassemble. Check screw connections for the specified torques. 450+ hours riding time: Check seatpost and replace internal components if necessary. Models: 30.9 mm / 417 mm / SB 0 mm: Diameter: 30.9 mm Length: 417 mm Setback: 0 mm Manufacturer Number: 16380 31.6 mm / 417 mm / SB 0 mm: Diameter: 31.6 mm Length: 417 mm Setback: 0 mm Manufacturer Number: 16381 Contents: 1 x 1 x Jagwire cable 1 x Jagwire cable housing Order Together: The remote kit is required for use. Weight: black | 417 mm | 30.9 mm | 0 mm | 1-speed: 515 g (post + cable), plus 25-60 g outer casing black | 417 mm | 31.6 mm | 0 mm | 1-speed: 532 g (post + cable), plus 25-60 g outer casing Manufacturer: Crankbrothers 3100 W Segerstrom Ave Santa Ana CA 92704 USA info@crankbrothers.com Distributor: Cosmic Sports GmbH Leyher Straße 47 90763 Fürth Germany info@cosmicsports.de