4040849941580

This S/FTP Cat 6a cable is designed for connecting network components such as routers, switches, patch panels, and end devices. The cable is used for high-speed data connections and is suitable for home networks, professional network installations, and data centers. The cable is pre-assembled with double shielding. Each wire pair is individually shielded with aluminum foil (PiMF), and the entire cable is surrounded by an aluminum braided shield. This construction limits electromagnetic interference and contributes to stable signal transmission in environments with increased demands on network performance. The halogen-free LSZH cable jacket limits smoke development and is suitable for use in public and professional environments. Specifications & Features • Cable category: Cat 6a • Shielding class: S/FTP (PiMF) • Assembly: pre-wired • Connection 1: RJ45 male (8P8C) • Connection 2: RJ45 male (8P8C) • Pinout: EIA/TIA-568B • Contact material: gold-plated • Contact layer: 3 µm gold • Conductors: copper (CU) • Conductor gauge: AWG 27/7 (stranded) • Cable construction: round • Cable diameter: approx. 5.9 mm • Minimum bending radius: > 59 mm • Maximum bandwidth: 500 MHz • Supported data rates: 10 / 100 / 1000 / 10000 Mbit/s • Cable jacket: LSZH (halogen-free) • LSZH compliant: yes • Shielding: 2× (PiMF foil shielding + aluminum braided shielding) • Kink protection: on both sides • Test status: Cat 6a tested (incl. measurement report) • Suitable for: Power over Ethernet (PoE, PoE+) • Standards: ISO/IEC 11801, EN 50173, ANSI/TIA-568 • Directives & certifications: CE, RoHS, REACH, WEEE, EMC, CPR, UL, Fluke-testable Applications • Connecting computers, servers, and network equipment • Networks with increased shielding requirements • Installations in interference-sensitive environments • Networks up to 10 Gigabit Ethernet • Network infrastructure in data centers Explanation of Network Cable Categories Cat 5e: 100 MHz | up to 1 Gbit/s | 28/7 CCA or 24 AWG copper | max. 100 meters at 1 Gbit/s Cat 6: 250 MHz | up to 1 Gbit/s (up to 10 Gbit/s at max. 55 meters) | 23 AWG copper | max. 100 meters at 1 Gbit/s, max. 55 meters at 10 Gbit/s Cat 6a: 500 MHz | up to 10 Gbit/s | 23 AWG copper | max. 100 meters at 10 Gbit/s Cat 7: 600 MHz | up to 10 Gbit/s | 23 AWG copper | S/FTP | max. 100 meters Cat 8.1: 2000 MHz | up to 40 Gbit/s | 22 AWG copper | RJ45 | max. 30 meters Cat 8.2: 2000 MHz | up to 40 Gbit/s | 22 AWG copper | GG45 / TERA | max. 30 meters Explanation of Certifications and Standards ISO/IEC 11801: International standard for structured cabling systems. Describes categories, performance requirements, and test methods for network cabling. EN 50173: European standard for generic cabling systems in buildings, based on ISO/IEC 11801. ANSI/TIA-568: North American standard that specifies twisted-pair cabling and connector pinouts. CE marking: Indicates that the product complies with European requirements for safety, health, and electromagnetic compatibility. RoHS: Directive that restricts the use of hazardous substances in electrical and electronic equipment. REACH: European regulation for the registration and control of chemical substances to protect human health and the environment. WEEE: Directive for the collection and recycling of waste electrical and electronic equipment. EMC directive: Directive for electromagnetic compatibility to limit interference between devices. CPR: European regulation for fire safety of cables permanently installed in buildings. UL certification: Safety certification focused on electrical and fire safety according to American standards. Fluke test: Measurement with professional network testers to check cable performance such as attenuation and crosstalk. Ask a product question