Ortlieb back-roller free single ql2.1 pannier

Product Description The - Single bag without PVC The ORTLIEB Back-Roller Free pannier - shown here as a single bag - is waterproof and does not require PVC. With the tried and tested Quick-Lock2.1 system, you can quickly and easily attach the bag to your pannier rack. The bag is equipped with a practical roll closure, which reliably repels external influences such as rain and at the same time affords you quick access to its contents. 20 litres of volume offer you enough storage space for a trip to the countryside, your daily commute or shopping. Even off the bike, the bag is always with you thanks to the shoulder strap. Specifications:Application:City & TouringType:rear wheelCompatibility:For pannier racks with up to 16 mm tube diameter (8 mm, 10 mm and 12 mm reducers included); with optionally available hooks also up to 20 mm tube diameterMaterial:nylon fabric, PU-coated (PD62, PS60)Protection Rating:dust-tight, splash-proof (IP64)Dimensions (HxWxD):42 cm x 23 (bottom) / 32 (top) x 17 cmVolume:20 litresApproved For:Load Capacity (max.):9 kgNote from the Manufacturer:To achieve the IP64 degree of protection (6 = dust-tight, 4 = splash-proof from all directions), the closure must be rolled up 3 to 4 times over and secured downwards. Taking into account wear and tear, it is recommended to protect all contact points between the bag mount system and the pannier rack or a bicycle frame with paint protection sticker(s). In addition, the permitted load of the pannier rack must be adhered to as well as the bag's maximum load capacity. Features:single PVC-free, waterproof rear pannier for trips and moreroll closureequipped with Quick-Lock2.1 mounting systemmade of robust PU-coated nylon fabricwith shoulder strap, also serves to brace the bagadditional closure strap with buckle in the middle, with D-ringintegrated inner pocket with zipped mesh pocket for small itemstwo 3M™ Scotchlite™ reflectors on the sideseasy-to-clean interioradditional edge protection on the rear side with slots for optionally available back carrying systemsymmetrical, can be used on the left or rightmade in GermanyTechnology:Quick-Lock2.1 Mount System The Quick-Lock2.1 mounting system is based on the proven Quick-Lock2 system, but offers some improvements. The top rail, in which the optional anti-theft device can also be fitted, is made in one piece, which provides extra stability. Particularly flat washers are used on the inside, so that the contents of the bag are hardly affected by them. The bag handle serves as a latch: If you lift the handle, the hooks open, if you let go, they close. The basic hooks are intended for tube diameters of 16 mm. However, with the included reducers or optionally available replacement hooks, the bag can also be attached to tubes with 8, 10, 12, 18 or 20 mm diameters without rattling. The reducers are pushed in sideways and thus remain securely in place. The two-component plastic with anti-scratch function, which is used for the lower rail in the form of a semi-ellipse, ensures soft contact surfaces and reduces friction on the rack. The lower hook can be variably adjusted and turned in 15-degree increments. It is easy to use: No tools are required for adjusting the hooks. Manufacturer Number:F5111 Contents:1 x 1 x ORTLIEB shoulder strap2 x 8 mm reducers2 x 10 mm reducers2 x 12 mm reducersOrder Together:Optional accessories: QL2.1 Hook 18 mm with adjustable handleQL2.1 Hook 20 mm with adjustable handleQL2 / QL2.1 anti-theft devicePacking CubeToiletry BagPacking Cubes compartment systemOffice Organizer Bagback carrying systemOuter Pocket SMesh Pocket Weight: black | 20000 ml: 925 g Manufacturer: ORTLIEB Sportartikel GmbH Rainstraße 6 91560 Heilsbronn Germany info@ortlieb.com