Claresa Rubber Base Coat 5ml 6

is a firming basecoat in a delicate soft pink color. The flexible Basecoat gives extra strength to weak, fragile and brittle nails. The thick consistency equales the nail surface and makes all the irregularities perfectly smooth. Moreover, the Basecoat does not run over the cuticles so that you can easily build the shape of the nails. The rubber base makes nail provision up to 1 cm. Because the basecoat equals the color of the nails, the colors of neon and pastel shades that are applied over it are reinforced and improved. Rubber Base 6 has a delicate soft pink color. This makes the color beautiful as a minimalist manicure and also perfect as a base that can be covered with any color UV/LED gellak from Claresa. Density: 4/5 The Rubber Base collection from Claresa consists of a wide range of colors that are perfect as a basis for gellak, but also beautiful in itself for a natural -looking, minimalist manicure. The rubber base is also perfect as a basis for a classic French Manicure or Trendy Milky Ombre Nails. The color range ranges from colorless to milky, pink, violet, peachy or even finishes with beautiful glitter. The possibilities are endless with Claresa Rubber Basecoat. The reinforced basis makes it possible to grow the nails without breaking and/or cracking. In addition to shine and a beautiful color, the rubber base collection gives the nails the care they deserve. Use: apply the base coat to a matted and degreased nail plate. Apply in thin layers and hard under a UV/LED lamp. Maintains 120 seconds of hard time with a UV lamp and 30 seconds with an LED lamp. To build the nails and create a bulging, iron the base coat along the bottle and apply it to floating, rotating movements over the first thin layer of rubber base. Make sure it is nice and smooth before you cure, so that you do not have to file afterwards. Then apply a topcoat for a minimalized manicure or choose a color gellak of your choice and finally conclude with a topcoat. Read the full user manual and instructions for removing gellak at the bottom of this page. Plus and minus points flexible and firming rubber base coat for Manicures Delicate, soft pink color gives extra firmness to weak, fragile and brittle nails thick consistency equalizes the nail surface and the color of nails to 1 cm possible for a minimalistic manicure or as a perfect base for gelchken the color of gelchken improved gellak the color of gelchak Quickly hardened under a UV/LED lamp extensive range of colors Note: the color may differ from reality. This is due to the color setting of the screen or lighting where the photo is taken. The color may also differ due to the top coat, such as when using a matte or a shiny top coat. Instructions for use: Step 1: Clean the nails and file them in the desired shape, Step 2: Remove the shine from the natural nails with a polishing block, Step 3: Push the backrons backwards with a goat and remove them with a cut belt tongs, Step 4: Make the nails clean and dust -free: STEP TO THE NAMERS. Wait until it is dry, this takes about 30 seconds, step 6: apply a thin layer of base coat and hard the nails under a lamp. Depending on the Basecoat 30-60 seconds under an LED lamp and 2-3 minutes under a UV lamp, step 7: Apply one thin layer of the hybrid gellak and hard the nails under a lamp. 30-60 seconds under an LED lamp and 2-3 minutes under a UV lamp, Step 8: If desired, apply a layer of hybrid paint and repeat the above step until the desired coverage is achieved, step 9: apply a topcoat and and Hard off the nails under the lamp. 30-60 seconds under an LED lamp and 2-3 minutes under a UV lamp, Step 10: Then clean the nails with a cleaner to remove the sticky layer, step 11: Massage the skin around your nails as extra care with a caring nail cream or cuticle oil. Note: More pigmented colors, such as black and white, may require a longer curing time. It is important to apply these layers thinly and, if necessary, to paint and harden a second time to achieve the desired coverage. Removing the Claresa UV/LED Hybrid Soakoff Gel nail polish: Step 1: Carefully file the topcoat off the nails, Step 2: Soak a cotton pad in nail remover and place the cotton ball on the nails, Step 3: Make sure that the nail plate is completely covered. You can use nail remover foil for this. Wrap your finger firmly here, step 4: Check after a few minutes if the paint is loose. If this is not the case, wait a little longer, step 5: When the gellak is released, remove the remains with an Orange Woodstick, step 6: After removing, use a hand cream and a cuticle oil for the optimum care of the hands. Ingrediënten: dipentaerythritolhexaacrylaat, hydroxypropylmethacrylaat, HEMA, isobornylacrylaat, dimethylacrylamide, acrylzuur, bis(methacryloyloxyethyl)fosfaat +/-CI 77891, CI 77491, CI 77492, CI 77742, CI 77510. This article is only for professional use and can cause an allergic reaction.