Fahrer e-bike splashguard latz

Reliable mud flap for the e-bike. Our E-BIKE LATZ mud flap prevents splashing rainwater from getting your shoes, trouser legs or bicycle trailer wet and dirty while you're riding. The mudguards often do not drain the splash water sufficiently, which is why the mudflap serves as an extension of the mudguard. That makes the ride to the office or the bike ride even more comfortable. In addition to protecting your clothing while riding on wet roads, the E-BIKE LATZ also prevents splashing stones from damaging the paint of the frame. The mudflap is made from a truck tarpaulin and attached to the lower part of the fender as an extension. Thanks to the reinforced material, the mudflap retains its shape even at higher speeds and headwinds, making it ideal for use on e-bikes. The E-BIKE LATZ can optionally be mounted on mudguards with a width of 60-65 mm on the front or rear wheel. Note: Suitable for a fender width of 60-65mm. Features: bicycle fender extension made from truck tarpaulin. Dimensionally stable, even at higher speeds. Color: black. Material: truck tarpaulin. Reinforced and optimized for use at higher speeds. Length: approx. 230 mm | Width top: 83 mm | Width bottom: 120 mm. Attachment to the mudguard bars: with cable ties (included). Weight: approx. 36 grams. Designed in Berlin Made in collaboration with workshops for people with disabilities. Scope of delivery: Mud flap LATZ and 3 x cable ties. Assembly: Thread a cable tie from the back through the two holes on the left and right sides of the patch, so that the pointed ends are at the top and the clasp at the bottom. Now turn the fender over and place it in the center of the lower end of the fender. Place the cable ties on the left and right around the fender stays and pull them tight. Cut off the protruding ends of the cable ties with side cutters.