Wolfcraft Undercover JigSet 4642000

This extensive Undercover drill set from Wolfcraft contains everything you need to make stable Pocket-Hole connections.

You can accurately make drill holes in workpieces and attach two workpieces with screws to form a stable connection. You can also cover the screw holes with the screw hole coverings of dried beech wood, so that they become invisible. With the integrated ruler you can measure the thickness of the wood.

This set is indispensable when you are working on Pocket-Hole connections.

• Corner connections
• T-connections
• Flat -connections
• Miter connections
• Measure the thickness of the board with the integrated lineal
• Preservation for all standard plank thicknesses (with a minimum of 12 mm)
• Delivery contains:
• 1 x Undercover Jig
• 1 x kicked drill, hss, diameter 9.5 mm, length 180 mm
• 1 x depth deposits, diameter 9.5 mm
• 1 x hexagon key, SW 3
• 1 x screwdriver Bit, Pozidriv PZ 2, 150 mm
• 8 x screw hole coverings, dried beech wood
• 10 x wood screws, 4 x 25 mm
• 10 x wood screws, 4 x 30 mm
• 10 x wood screws, 4 x 40 mm
• 10 x wood screws, 4 x 60 mm
• Supplied in plastic suitcase

For your safety It is essential to follow the safety instructions of the manufacturer of your drive machine. These devices must comply with the VDE regulations. Devices that were built after 1995 must have a CE certificate. Always pair the power supply before you change attachments, before you change your workpieces, before you carry out maintenance and when the device is not in use. Test before you start working that the device and the tools work well. Never work with damaged or blunt tools. Before you start working, check that the device is mounted correctly (check the screw couplings). Clamp the workpiece firmly in place. Make sure that the device is strongly supported. When using the device and the tools, make sure you have the data with regard to min./max. speeds and the direction of rotation that follows the product, on the package or in the instructions. The tools may only be used for their intended purposes. Never remove the protective devices. Make sure that your clothing (especially sleeves) do not flutter loose and protect your hair. Protect your ears when you perform work that produces a high noise level. Wear safety glasses and mouth and nasal protection for tasks that produce dust, chips, vapors or sparks. Never reach the device while it is in operation. Make sure that all electrical equipment is protected against dust and humidity. Keep children away from your workshop and store your device and tools in a safe place. Never allow inexperienced people to work with your equipment and tools without instruction or supervision. Always plan your work carefully and make sure you remain concentrated. Keep your workplace clean and tidy. Only use WolfCraft® reservoir components. We retain the right to technical adjustments.