4040849918919

This is a CAT7A S/FTP (PiMF) duplex network cable on a reel with a solid core, intended for fixed data connections where a loose cable without pre-assembled connectors is used. The duplex version consists of two completely separate network cables that are laid parallel in one common sheath, so that both cables follow the same cable route. The construction includes twisted pairs, an S/FTP structure (foil per twisted pair and braided shielding), and a halogen-free cable sheath (LSZH), with the electrical properties determined by the CAT7A standard. **Application** The duplex version is intended for installations where two separate connections must be laid simultaneously, for example, for redundancy or separated functions. Both cables are electrically independent and suitable for fixed indoor installation with LSA connection technology. **Construction and Properties** The cable is constructed from solid copper conductors (CU) with an AWG 23/1 structure. Each wire pair is individually foil-shielded (PiMF), with a braided shield around the entire cable. The LSZH jacket is halogen-free and limits smoke development and corrosive gas formation in case of fire. **Specifications** • Category: CAT7A • Maximum frequency: 1000 MHz • Cable construction: S/FTP (PiMF) • Version: Duplex (2 separate network cables) • Core: Solid core (CU) • Conductors: AWG 23/1 • Conductor diameter: 0.59 mm • Jacket: LSZH (halogen-free) • Diameter per cable: 7.5 mm • Duplex dimensions: 15.8 x 7.5 mm (W x H) • Impedance: 100 Ohm • Fire class: Dca (CPR) • Power over Ethernet: Suitable for Power over Ethernet according to IEEE 802.3 standards; the maximum load is determined by cable category, conductor diameter, and installation standard • Length: 500 meters • Delivery form: Reel (wooden drum) **Standards** • ISO/IEC 11801: International standard for structured cabling (generic data cabling) • EN 50173-1: European standard for generic cabling systems in buildings • EN 50174: European installation standard for ICT cabling (installation and separation of cable routes) • EN 50288: European product specification series for balanced data cables • IEC 61156: IEC series of standards for balanced communication cables for digital transmission • EN 50575 (CPR): European standard for fire classification of cables under the Construction Products Regulation • CPR Dca: Fire classification class under CPR (performance classification according to EN 50575) • EN 60332-1: Test standard for flame propagation (fire behavior of single cables) • EN 60754-1/2: Test standards for halogen gases and acidity/conductivity of smoke gases during combustion • EN 61034: Test standard for smoke density during combustion (smoke development) • IEEE 802.3: Ethernet standards (from 10 Mbit/s to higher speeds, depending on network components and installation) • IEEE 802.3af/at/bt: Power over Ethernet standards (PoE/PoE+/4PPoE), applicability depending on installation and heat dissipation **Explanation of Used Terms** • CAT7A: Cable category with a maximum frequency of 1000 MHz according to the category classification for data cabling. • S/FTP (PiMF): Shielding construction with foil per wire pair and a braided shield around the cable. • Duplex: Version in which two completely separate network cables are enclosed parallel in one jacket. • LSZH: Halogen-free jacket that generates less smoke and produces fewer corrosive gases in case of fire than halogen-containing jackets. • AWG 23/1: Wire gauge with one solid conductor per core, intended for fixed installation and LSA termination. • CPR: European Construction Products Regulation that classifies, among other things, the fire behavior of cables via EN 50575. Ask a product question