When converting the original turn signals to LED or halogen turn signals, the flashing frequency changes automatically. Parallel-connected power resistors can help with this. For Micro 1000® / Rhombus DF / DF Dark and a light control lamp, 1 additional 33 Ohm resistor for the tail light and 1 additional 7.5 Ohm resistor for the brake light are required. Required resistor when converting to Kellermann turn signals (per turn signal) 21 watt power consumption of the original turn signals: Micro 1000® Halogen - 10 Ohm, Micro 1000 / Micro Rhombus (yellow, white, Dark, DF, PL, Extreme) - 7.5 Ohm, BL 1000 Halogen (yellow, white, SG) - no power resistor, BL 1000 LED (LED, Dark, PL) - 7.5 Ohm. Required resistor when converting to Kellermann turn signals (per side) 10 watt power consumption of the original turn signals Micro 1000® Halogen - 10 Ohm, Micro 1000® / Micro Rhombus (yellow, white, Dark, DF, PL, Extreme) - 10 Ohm, BL 1000 Halogen (yellow, white, SG) - no power resistor, BL 1000 LED (LED, Dark, PL) - 10 Ohm. Type Accessories