Claresa Top Coat Bubble Black Mat No Wipe 5ml

is a transparent, matte topcoat with black speckles. With this unique topcoat you create a unique nail art in a few seconds. The top coat gives a matt effect to the nails. The speckles range from size and shape, for a multidimensional look. Apply over a nude color, on natural nails or over a gellak of your choice and discover the effect! The top coat is suitable for finishing gellak, gel nails and acrylic nails. The No Wipe Topcoat leaves no sticky dispersion layer on the nails. After curing the topcoat under a UV/LED lamp you are ready! The top coat does not have to be taken with a nail cleaner. Claresa has an extensive range of top coats that are suitable for universal use. For example, choose a shiny or matte finish or a top coat with shiny decorations. There is also a choice between top coats that leave a sticky dispersion layer or not. For example, a suitable top coat is available for every desired manicure finish. Use: apply the top coat over the already cured color layer. Hard out under a UV/LED lamp with 120 seconds hard time for a UV lamp and 30 seconds hard time for an LED lamp. Read the full user manual and instructions for removing gellak at the bottom of this page. Plus and downsides matte top coat with black particles no wipe does not leave a sticky dispersion layer behind gives a unique nail art effect universal use for hybrid gel polish, gel and acrylic nails quickly cured under a UV/LED lamp not suitable for nail decoration that has a clay and stack of the user manual layer in the use forecast: 2: Remove the shine from the natural nails with a polishing block, step 3: Push the cuticles back with a goat boat and possibly remove them with a cuticle tongs, step 4: Clean the nails and dust -free with a cleaner and wait until the nails are dry, step 5: apply a thin layer of primer to the nails. Wait until it is dry, this takes about 30 seconds, step 6: apply a thin layer of base coat and hard the nails under a lamp. Depending on the Basecoat 30-60 seconds under an LED lamp and 2-3 minutes under a UV lamp, step 7: Apply one thin layer of the hybrid gellak and hard the nails under a lamp. 30-60 seconds under an LED lamp and 2-3 minutes under a UV lamp, step 8: If desired, apply a layer of hybrid paint and repeat the above step until the desired coverage is reached, step 9: apply a topcoat and hard the nails under the lamp. 30-60 seconds under an LED lamp and 2-3 minutes under a UV lamp, Step 10: Massage the skin around your nails as extra care with a nourishing nail cream or cuticle oil. Note: More pigmented colors, such as black and white, may require a longer curing time. It is important to apply these layers thinly and, if necessary, to paint and harden a second time to achieve the desired coverage. Removing the Claresa UV/LED Hybrid Soakoff Gel nail polish: Step 1: Carefully file the topcoat off the nails, Step 2: Soak a cotton pad in nail remover and place the cotton ball on the nails, Step 3: Make sure that the nail plate is completely covered. You can use nail remover foil for this. Wrap your finger firmly here, step 4: Check after a few minutes if the paint is loose. If this is not the case, wait a little longer, step 5: When the gellak is released, remove the remains with an Orange Woodstick, step 6: After removing, use a hand cream and a cuticle oil for the optimum care of the hands. Ingredients: polyurethane-1, hydroxycyclohexyl phenyl keton, hema, quartz +/- ci 77891, CI 77820, CI 77492, CI 77266 This article is only for professional use and can be an allergic cause reaction.