Cycplus Cycle Stallhead Cup press 1 and 1.1 8 CPL
Cycplus Cycle Stallhead Cup press 1 and 1.1 8 CPL Raigned and is sent as soon as it is back in stock.
- Suitable for 1 "and 1 1/8" ball head
- Max. Baller head length: 200 mm
- Easier and safer with lubricant
Delivery time: Order on workdays before 5 p.m., and we are still sending the article today.
Delivery time: Order on workdays before 5 p.m., and we are still sending the article today.
The track code is sent by email so that you can send the shipment of this Simply follow.
Could not load pick-up availability
Cycplus Cycle Stallhead Cup press 1 and 1.1 8 CPL
Description
Description
Cycle head press set suitable for 1 "and 1 1/8" ball head.
- Ballhead Cup press for pressing the outer head cup with bullet guidance
- Max. Baller head length: 200 mm
The tool is to squeeze the lower and upper cup evenly into the head tube. Before use, it is highly recommended to check whether the cup fitting is not damaged. If this is the case, adjust the size with the head cutter.
Tip: Put some fat on the head tube to be squeezed and the Lower Scale and it is not only easier, but is also better for the tools.
Cycle 720009
With This Tool the Top and the Bottom Head Cup Will Be Pressed Into The Steerer Tube SimultaneUously. Scope of Delivery: - Tool Holder with T -Handle, - Trapezoidal Thread Spindle 360mm, - Press Bush Pair, - Threaded Sleeve, - thrust Bearing. Preparation: Screw the trapezoidal thread spindle with the side, which has a fine thread, into the tool Holder. Put the thrust bearing and then one of the press bushes on the spindle. Use: Place the Top Head Cup on the Press Bush and Insert the Tool Into The Steerer Tube. Place the bottom head cup on the other press bush and put both of them on the spindle of the tool. Afterwards Screw the threaded Sleeve on the trapezoidal therad of the spindle. Rotate the Tool Holder and Start to Press the Head Cups. Pay Attention, that the Cups are not getting jammed duration the work. Before you start to press the head cups, check the diameter tolerance of the cup seat in the frame. You might need to correct the size by Milling and Facing the Steerer Tube First. Use corresponding head tube facing tools (code: 720005; 720006; 720210). Tip: Put some lubricant on the head cups to be pressed. It will make the work Easier and Safe the Tool.
Article number: 7720009
EAN: 8590831240239
Brands: Cycle
Type of tools: ball head
Colour.
Silver bluebal headcup press for pressing the outer head cup with ball guide for 1 inch and 1 1/8 inch cycle ball headcup press 1 and 1.1/8 cpl cycle Balhead Cup press 1/1
Payment & Security
Payment methods
Your payment data is processed safely. We do not store credit card details and have no access to your credit card details.
Frequently asked questions
Can I pay afterwards?
Can I pay afterwards?
This Depends on the
Payment Method You Choose At The Checkout, We Try To Support As Many As
possible
Can I pickup my order in person?
Can I pickup my order in person?
Tormino Focuses On
Shipment Across The Entire World, resulting in multiple warehouses and thus
Only supporting shipment to your provid address.
Can Multiple Different Items Be Shiped In The Same Shipment?
Can Multiple Different Items Be Shiped In The Same Shipment?
Due to the amount of different items we have on sale it can happen that your order will be split in multiple different packages, the shipping fee howver will remain the same.
Can I return a product?
Can I return a product?
YES! Any item can be returned within 30 days after purchase unused and in original packaging. To return an item you will have to pay the local shipping fee back to our return warehouse.
When Will a Sold Out Item Be Back In Stock?
When Will a Sold Out Item Be Back In Stock?
This Depends a lot on the item in Question, some go out of rotation, Others Might come back in stock at a later date. Feel Free to Reach Out To support@tormino.com for the status on a specific item.
