A bicycle pedal with a patented SANDBLOCK® material "anti-slip" insert on both sides, a durable Polypropylene axle housing and cage, specially designed for use on electric bicycles. Also suitable for city, trekking and hybrid bicycles. Features

The "lightweight" ball bearing system provides significant savings in weight and height

The pedals are each equipped on two sides with integrated approved reflectors and a closed bearing system Pedal type

"2-component pedal", consisting of:

a black Polypropylene axle housing and cage (one piece)

the extra large "anti-slip" insert in the cage is made of a grey TPE (thermo-plastic-elastomer). Ball bearing

Adjustable and lightweight ball bearing system, according to the "ball & cone" principle, on both sides

With 14 x 3/32" caged balls on both sides Axle

Boron steel, heat-treated to 75HRA (+/-3)

With 9/16"- 20 TPI thread Reflectors

Integrated into the pedal cage

Approved according to BS, JIS, TPP, as well as German StVZO standards Dimensions

222* x 90 x 27 mm (*length x width x height)

*length = maximum length of mounted pedal (part protruding beyond the crankset) Weight

364 gr/per set Standardization

The pedal complies with ISO standards.

ISO 4210-8: "Bicycles-Safety requirements for bicycles-Test methods for pedal and crankset" SANDBLOCK Sandblock is the official registered trademark of Marwi for a patented composition of materials that forms a wear-resistant perfect anti-slip insert for pedals. The anti-slip effect of the material is guaranteed, even when wet or contaminated with oil or grease. This anti-slip insert is inseparable from the pedal due to special, waterproof technology. The UNION SANDBLOCK® pedals have an extra large anti-slip insert (thus more direct contact with the cyclist's shoe) and are specially designed for use on E-Bikes. The advantages of this high-quality SANDBLOCK® anti-slip insert are:

A very good anti-slip function, much better than that of the usual TPR (rubber) insert

Significantly more wear resistance compared to that of the usual TPR (rubber) insert

The anti-slip function remains optimal, even when the surface of the material is wet or contaminated with oil or grease The SANDBLOCK® anti-slip surfaces are very wear-resistant, waterproof and firmly connected to the robust polypropylene cage of the pedal via a new patented technology. Compared to the self-adhesive sandpaper versions of pedals used, this strong connection is waterproof and cannot be separated or removed from the pedal. Technical details and test results:

Various laboratory tests prove that the SANDBLOCK® cannot be separated or removed from the pedal cage, even when tools are used for this purpose

The anti-slip function of the SANDBLOCK® performs much better than the standard anti-slip material made of sandpaper

An anti-slip durability test shows that with a load of 30 kg and at 10,000 cycles, the material wears only 0.25 mm

With a standard sandpaper insert, this already shows signs of wear after 20 cycles. SANDBLOCK® does not

The standard sandpaper insert can be very easily separated from the polypropylene cage of the pedal. With SANDBLOCK®, this does not happen By applying SANDBLOCK® material instead of TPR or standard sandpaper, these UNION pedals achieve an even higher level of safety for the cyclist in all weather conditions.