Soudal click fix low | pu gun foam |750 l - 110725

Fine-dispensing PU gun foam for perfectly dosed professional application. The foam has limited post-expansion, resulting in less foam waste. Equipped with the patented "Click & Fix" system.Special featuresHigh dimensional stability (no shrinkage or post-expansion)Great filling capacity, but expands less vigorouslyHigh insulation value, thermal and acousticExcellent mounting propertiesVery precisely dosable, allowing for faster finishing.ApplicationMounting and sealing of door and window framesFilling of joints, wall penetrations and cavitiesInsulating panels, corrugated sheets, roof tiles, etc.Instructions for useShake the can well for at least 30 seconds. Using the unique patented Click & Fix system, attach the can to the gun with a quarter turn. Adjust the regulating screw and dispense foam by pulling the trigger. Only partially fill cavities: the foam will expand. Shake regularly during use. If working in multiple layers, moisten between layers. Remove spilled, uncured foam with Soudal Click & Clean. Cured foam can only be removed mechanically or with Soudal PU-remover. The can, with the gun attached, can be stored for later use without risk of curing. If no new can is attached to the gun, thoroughly clean the gun with Soudal Click & Clean. Slightly moistening the substrate accelerates curing and provides an even better cell structure. Processing temperature: -25°C to +30°C. Preferably store upright.