Special paint for creating a removable film. For treating smooth, non-absorbent surfaces, such as bare metal, aluminum, glass, and surfaces treated with 2K paints. MoTip Removable Paint is not suitable for treating surfaces treated with 1K paint systems. Product Features

Fast-drying

Good opacity

Resistant to chemicals and weathering

360° Valve Physical and Chemical Properties

Content: 500 ml

Base: Synthetic rubber

VOC content: Approx. 92% w/w

Solid content: Approx. 8% w/w

Yield: 0.2 - 0.4 m² when applying 5 coats

Dust dry: After approx. 10 minutes

Tack-free: After approx. 30 minutes

Removable: After 2 hours

Heat resistant: Up to 100°C Instructions for use Before use, carefully read and follow the instructions on the packaging. Pre-treatment Clean the surface thoroughly, without sanding. The surface must be clean, dry, and grease-free. Do not apply primer before applying removable paint. Painting The surface must be clean, dry, and grease-free. Bring the aerosol can to room temperature. Ideal processing temperature 15 to 25°C and a relative humidity of <65%. Shake the aerosol can well for 3 minutes before use and spray a test piece. Distance to the surface to be treated approx. 25 to 30 centimeters. Apply at least 5 coats of removable paint. For good layer build-up, necessary for later removal of the removable paint, apply an extra layer on critical areas (corners, edges). Apply the layers with an interval of 5 minutes. The drying time depends on the ambient temperature, humidity, and the applied layer thickness. MOTIP removable coating black matte This coating contains a removable paint also known as plasti dip. The coating is comparable to the well-known car wrapping. The coating can be used on a part of your choice and then easily removed, without damaging the existing paint or paint layer. The coating is easy to use and therefore suitable for everyone. Features of MoTip SprayPlast spray cans Easy and quick processing, in various colors and designs Easy to remove Protects against oil, grease, salt, stone chips, scratches, dirt, and rain Good adhesion to many different materials, such as metal, plastic (PP, PE, PVC), and glass Not suitable for application on porous materials such as wood, concrete, and stone. Apply in 4 to 5 coats with an interval of 5 minutes. Can be overpainted with Acrylic, NC, Alkyd, Water-based and 2 component paints. This does not affect the later removal of the MOTIP SprayPlast layer. MOTIP SprayPlast is dry after 2 hours The MoTip SprayPlast spray can is equipped with a 360-degree valve Not durable Resistant to car washes, and briefly resistant to high-pressure cleaners max. 130bar Heat resistant up to a maximum of 100 degrees Specifications of the MoTip SprayPlast PlastiDip paint Binder: a rubber-like polymer Odor: solvent Gloss: 60° measuring angle according to DIN 67530 gloss: 80-85 GE matte: 8 GE Yield: Depending on the opacity of the color and the substrate, 400 ml will be sufficient for 2 wheels; depending on the size and structure of the rim Temperature resistance: up to 100°C Shelf life / storage: 10 years possible storage provided (= 10° -25°C, relative humidity of 60% max.) safety data sheet available via info@soer.nl