Claresa rubber gel 10 Milky White 90gr.

is a very resistant and easy building gel in a milky white color to extend, strengthen and model the nails. Are you looking for a product for a sustainable and resistant manicure? Or are you looking for a formula with which you can work very easily and pleasantly? Then the rubber gel from Claresa is perfect! The rubbergel is thick and resistant to ambient temperatures. Because of this, the gel will behave perfectly even on hot days. The Builder Gel is ideal for nail construction and nail extension. You can work quickly through the thixotropy (liquid memory), which ensures that the gel does not flow over the cuticles. By applying the builder gel with a brush, the masses are perfectly leveled, so that even beginners can easily distribute the product. The gel covers and corrects irregularities of the nail plate and can be used in itself or in combination with gellak. No. 10 Milky White has a milky white color and good coverage of up to 90%. Claresa Rubbel Gel has a excellent adhesion with which you can align, harden and extend the nails. The Builder Gel keeps the nails strong, so that the natural nail can grow without breaking or crumbling. The formula is durable and strong, making it perfect for long nails. The Builder Gel gives the nails an intense shine and is suitable for both professional use and at home use. The rubber gel needs a primer for adhesion. The Bonding Base for Gel from Claresa is very suitable for this! The rubber gel is available in various covering nude tones with something for everyone. This jar has a capacity of 90 grams. Use: Step 1: push the cuticles back well; Step 2: Shape the nails, moan the plate and thoroughly clean it with a cleaner; Step 3: Apply a thin layer of primer to the nails. Wait until it is dry, this takes about 30 seconds; Step 4: Apply a thin layer of base coat for gel and hard the nails under a lamp. Depending on the Basecoat 30-60 seconds under an LED lamp and 2-3 minutes under a UV lamp; Step 5: If you want to extend your nails on the template, take it off under the nail and apply a small amount of gel with a special brush. Divide it carefully over the entire nail; Step 5: Let the Builder gel cure for 60 to 120 seconds in a UV/LED lamp; Step 6: Possibly apply a second layer and let it harden for 60 to 120 seconds. Step 7: Possibly apply a gellak of your choice and let it harden. Step 8: Close with a topcoat and hard it under the lamp. Step 9: Remove any sticky dispersion layer with Cleaner and a nail wipe. Plus- en minpunten Rubber builder gel met zeer lange houdbaarheid Milky White kleur met tot 90% dekking Ideaal voor het versterken, verlengen en modelleren van de nagels Door Thixotropie (vloeibaar geheugen) brengt het gemakkelijk aan Bestand tegen omgevingstemperaturen Formule egaliseert zelf bij aanbrengen met een penseel Vloeit niet over de nagelriemen Duurzaam en sterk, ideaal voor lange nagels Let op: de kleur kan afwijken van de reality. This is due to the color setting of the screen or lighting where the photo is taken. The color may also differ due to the top coat, such as when using a matte or a shiny top coat. Ingredients: Bis-Hema, Polyneopenthyl glycol adipate/ipdi copolymer, urethane acrylate, trimethylolpropane copolymer, silica dimethyl silylate, hexanediol dimethyacrylate, polyhydroxylic vertis, isobonbarxlicl Methacrylate, hydroxycyclohexyl phenyl ketone, ethyl trimethylenzoyl phenylphosphinate, polyether acrylate, dripopylene glycol diaacrylate, polyester acrylate, hydroquinone, cidroxylvanoleole, and cidroxylvanoleoleoleoleole 74160, CI 60725, CI 15850, CI 15985, CI 77266, CI 77491, CI 77492, CI 77499, CI 77004, CI 16035, CI 19140, CI 61570. This article is only for professional Use and can cause an allergic reaction.