Soudal sws inuti standard | fönster anslutningsfolie | 300 x 30 mm - 153506

SWS Inside Standard is an airtight and vapor-retardant window connection film for interior use, with a powerful self-adhesive strip for attachment to the window side. Always to be fully glued to the inner leaf using Soudafoil 330D or 360H. Can be plastered over directly. Part of the SOUDAL WINDOW SYSTEM.Special characteristicsAirtightVapor-retardantSelf-adhesive strip for attachment to the window frame (pressure-sensitive)FlexibleCan be plastered and painted overTear-resistantGood temperature resistanceSuitable for uneven substratesEasy installation, easily pliable in cornersApplicationSWS Inside Standard window tapes guarantee an airtight and vapor-retardant connection of the window frame to the surrounding supporting structure. This flexible membrane can also be used as an airtight seal for all types of wall connections, even on uneven surfaces. For indoor use only.Instructions for useSWS Inside Standard should only be used on the inside. Depending on the situation, the installation of SWS Inside Standard can be carried out before or after the installation of the facade element (e.g. window frame). There are 2 methods for applying SWS Inside Standard. You can work with a single piece or with 4 separate strips. In both cases, extra material must be provided for the corners (approx. 5 to 10 cm per corner). After unrolling and removing the protective film, glue the film with the exposed adhesive strip (on the printed side) to the side OR to the front of the facade element. Both sides of the film can be plastered and painted over. To glue the film to the raw construction, Soudafoil 360H or 330D must be used. Glue the film, not too tightly, to the raw construction to absorb any movements between the different building elements, but avoid creases. Then press the film evenly with a pressure roller. Consult the technical data sheet for more information.