Special characteristics THF-free Fast Does not drip Thixotropic Gap-filling For bonding pipes, sockets and fittings with interference and loose fits (gap-filling) in pressure and drainage systems Suitable for diameters ≤ 315 mm Maximum tolerance 0.8 mm gap fit / 0.2 mm interference fit Suitable for piping systems according to EN1329, 1453 and 1455, among others Meets requirements European standard 14814: Adhesive for thermoplastic piping systems for fluids under pressure Meets requirements European standard 14680: Adhesive for non-pressure thermoplastic piping systems KIWA: Adhesives for joints in PVC and PVC/CPE water piping systems. Approved for drinking water. Certificate K5067 based on BRL K525 KOMO: Adhesives for joints in unplasticized PVC indoor sewerage systems. Certificate K4395 based on BRL 5221 (EN 14680) CE: Adhesive for non-pressure thermoplastic piping systems in installations for the transport/disposal/storage of water (EN 14680) Technical data Content: 250 ml Colour: colourless Temperature resistance: +40 °C, peak load 95 °C Shelf life unopened: at least 18 months in unopened packaging stored between +5°C and +25°C. Store packaging tightly closed in a dry, cool and frost-free place. Chemical resistance: the chemical resistance of adhesive joints depends on the gap width, drying time, pressure, temperature, type and concentration of the carrier. The adhesive joint generally has the same chemical resistance as the material itself. Exceptions to this are a small number of very aggressive chemicals such as concentrated acids, corrosive solutions and strong oxidizing agents. Length: 73 mm Width: 73 mm Height: 105 mm Packaging: bottle with brush Weight: 285 g Viscosity: 1.2 mPa.s.