Tec7 x-seal sort, patron, 310 ml | forsegl alt og overalt - 528013000

Special characteristicsExtremely flexible and satin finish. Adheres to most building materials, even wet ones. Safe and mould-resistant. Perfectly paintable. Can be used indoors and outdoors. Technical dataBase: MS hybrid polymer. Odour: neutral. Shore-A hardness (DIN 53505): 32. Modulus of elasticity at 100% elongation (DIN 53504 S2): ± 0.6 N/mm². Elongation at break (DIN 53504 S2): ± 600%. Elastic recovery (DIN EN ISO 7389): > 60%. Tensile strength (DIN 53504 S2): ± 1.6 N/mm². Movement capability: 20 %. Consistency (DIN EN ISO 7390): stable up to = 3 mm. Curing: by polymerisation under the influence of air humidity. Application temperature: +5°C to +40°C. Open time at 23°C/ 50% R.H.: max. 30 min. Curing through at 23°C and 50% R.H.: after 24 h: ± 2.5 mm; after 48 h: ± 3.5 mm. Shrinkage after curing (DIN EN ISO 10563): = 3%. Paintable: yes. Density at 23°C and 50% R.H.: 1.48 ± 0.05 g/cm³. Temperature resistance: from - 40°C to + 90°C. Chemical resistance: Good: water, aliphatic solvents, oils, greases, diluted organic acids and bases. Moderate: esters, ketones and aromatics. Not resistant to: concentrated acids and chlorinated hydrocarbons. Weather resistance: very good. Shelf life: 18 months, stored cool and dry in original packaging. Frost-resistant during transport down to -15°C. Safety measures: Please consult the safety data sheet. Standard deliveryX-Seal Cartridge | Black Documents 528013000 Technical data 528013000 Safety data sheet