Festool Akku-Tischkreissäge CSC SYS 50 ebi-plus – 577374

Special featuresSawing precision to go. The cordless table saw in Systainer format. Versatile: Parallel cuts up to 280 mm; cross-cut width up to 450 mm. Angle cuts from -2° to 47°. Practical: at a cutting height of up to 35 mm, even angle cuts up to -10°; ideal for undercutting skirting boards. Compact and mobile: transportable with one hand in the practical Systainer format. Even easier with the UG-CSC-SYS subframe. Highest precision: Height and angle are electrically set at the push of a button via the digital display, accurate to the tenth of a millimeter. Repeat accuracy: Height and angle adjustment (mm and inch) are made parallax-free via the digital display, i.e. more accurately than by sight. Repeatable cuts are guaranteed. Comfortable: Four saw blade settings can be saved and selected via the digital display. Highly precise rip fence: robust rip fence with double clamping (with only one clamp) for exact alignment and perfect sawing results. Highly precise miter gauge: The miter gauge is optimally aligned and centrally clamped via a groove on the sliding carriage. For miter angles between -70° and +70°. Absolutely vibration-free: ball-bearing sliding carriages for parallel and angle cuts with the highest precision. Powerful: The brushless EC-TEC motor with high speeds of 6800 rpm ensures fast sawing progress and perfect sawing results. Untiring: The combination of brushless EC-TEC motor and dual battery system with two 18 volt batteries (from 4.0 Ah) ensures long running performance. Long service life: The brushless EC-TEC motor is extremely robust, durable and maintenance-free. Material-matched working: With saw blades for every material, the speed selection for material-matched speed is done via the digital display. Low dust: dust bag for low-dust working even without a mobile dust extractor. Healthy working in a system: Also ideal in combination with Festool cordless dust extractors. Combinable: with the complete Festool Systainer system and bott vehicle equipment. Flexible subframe: The UG-CSC-SYS subframe is the perfect transport solution for the job site and the ideal workbench in one. Unique: three-year warranty also on batteries and chargers. Cross-cuts up to 450 mm wide, precise and fast with the integrated sliding carriage. Longitudinal cuts up to a cutting height of 48 mm and a width of 280 mm with sturdy support on the integrated folding table. Angle cuts from -10° to 47° thanks to the swiveling saw blade. Exact height and angle adjustment by means of electric stepper motors. Adjustable to 0.1 mm accuracy and controllable via display. Practical transport in a handy Systainer format. Technical data Battery capacity 5.00 Ah Product weight 21.00 kg Battery voltage 36 V No-load speed 4500 – 6800 min?¹ Saw blade bore 20.00 mm Tilt angle -10 - +47 ° Cutting height 0° 0 - 48 mm Cutting height 45° 0 - 34 mm Cutting height -10° 21 - 32 mm Miter angle 0 - 70 ° Parallel cut width 280.00 mm Table height 280.00 mm Dimensions (L x W x H) 512 x 396.00 x 296.00 mm Dust extraction connection Ø 27/36 mm Drive type Mains powerStandard accessoriesCircular saw blade WOOD FINE CUT HW 168x1.8x20 WD42Rip fenceSafety push stickMiter gaugeChip collection bagRiving knife for concealed cutsRiving knife with protective coverOperating toolEnergy set SYS 18V 2x5.0/TCL 6 DUO Documents 2