Soudal sws dentro extra | 200 mm x 30 m - 155283

SWS Inside Extra is an airtight, vapour-retardant window connection foil for indoor use, with a strong self-adhesive strip for attachment to the window side and a strong full-surface self-adhesive layer for attachment to the rough construction. Directly paintable/plasterable. Part of the SOUDAL WINDOW SYSTEM. Special Features Airtight Vapour-retardant Full-surface self-adhesive for attachment to the rough construction (pressure-sensitive) Self-adhesive strip for attachment to the window profile (pressure-sensitive) Flexible Paintable/plasterable and bondable Easy installation, easily foldable in corners Tear-resistant Good temperature resistance Application SWS Inside Extra window tapes guarantee an airtight and vapour-retardant connection of the window frame to the surrounding load-bearing structure. This flexible membrane can also be used as an airtight seal for various wall connections. For indoor use only. Instructions for use SWS Inside Extra may only be used indoors. Depending on the situation, the installation of SWS Inside Extra can be carried out before or after the installation of the facade element (e.g. window frame). There are 2 methods for applying SWS Inside Extra. You can work with a single strip or with 4 separate strips. In both cases, extra material must be provided for the corners (approx. 5 to 10 cm per corner). After unrolling and removing the protective film, stick the foil, with the exposed adhesive strip (on the printed side), to the side of the facade element or remove the protective film from the adhesive strip on the non-printed side and stick the foil to the front of the facade element. Always ensure that the text is readable and facing the visible side. Evenly remove the remaining protective film. Stick the foil, not too tightly, to the rough construction to absorb any movements between the different building elements, but avoid folds. The adhesive layer of the foil is pressure-sensitive; the more firmly it is pressed, the better the adhesion. Use a pressure roller for this.