CAT 7A Network Cable Reel RJ45 This CAT 7A network cable reel features a high-quality shielded, halogen-free S/FTP (PiMF) installation cable and is intended for establishing temporary network connections over longer distances. The cable is mounted on a robust cable reel and suitable for mobile and professional use. Application Suitable for temporary network setups at events, presentations, training sessions, conferences, trade shows, and emergencies. Allows for quick setup of a network or internet connection over longer distances. Connections • Number of connections: 2× RJ45 jacks (8P8C), shielded Cable Specifications • Specification: CAT 7A • Shielding class: S/FTP (PiMF) • Bandwidth: up to 1200 MHz • Number of pairs: 4 • Conductor: solid copper (CU) • Wire gauge: AWG 23/1 (solid) • Number of shielding layers: 2 (aluminum foil + braid) • Jacket material: LSZH • Cable diameter: approx. 7.7 mm • Meter marking: present Electrical Properties • Impedance: 100 Ohm • Suitable for Power over Ethernet according to IEEE 802.3af • Suitable for PoE+ according to IEEE 802.3at Mechanical Design • Stable metal base for secure positioning • Rubberized carrying handle for controlled cable guiding • High visibility due to signal color (orange) Operating Temperature • Operating temperature: -10 °C to +60 °C Certifications & Compliance • ISO/IEC 11801:2002 Class Fa (up to 1200 MHz) • EN 50173 Class Fa (up to 1000 MHz) • IEC 60603-7-51 • IEEE 802.3af / IEEE 802.3at (PoE / PoE+) • UL94 V0 • RoHS • REACH Explanation of Certifications & Standards The certifications and standards below indicate the technical, safety, and fire safety requirements that this network cable reel meets. ISO/IEC 11801 Class Fa International standard for structured network cabling. Class Fa defines performance requirements up to 1200 MHz for high-quality data transmission and low crosstalk in CAT 7A cabling. EN 50173 Class Fa European standard for generic cabling for information technology in buildings. This standard ensures compatibility and performance of CAT 7A infrastructures up to 1000 MHz. IEC 60603-7-51 Standard for RJ45 connector interfaces with improved electrical properties for high-frequency data transmission within CAT 7A networks. IEEE 802.3af (PoE) Standard for power transfer over Ethernet, where data and power are supplied over the same network connection. IEEE 802.3at (PoE+) Extension of PoE with higher power, suitable for devices with higher power requirements. UL94 V0 Fire safety classification for plastic components. Material with UL94 V0 classification is self-extinguishing and limits flame spread. RoHS European directive that restricts the use of hazardous substances in electronic equipment. REACH European regulation for the registration and control of chemical substances, aimed at protecting human health and the environment. Ask a product question